1970 Wellcraft V-20 Project 

This was a 1970 V-20 with a 1979 200hp Evinrude I bought from Eckerd College waterfront program that needed a lot of work so here it is...

This is what I saw first to make me drive down to Flordia and get it.
This is what I saw first to make me drive down to Flordia and get it.
Viewed: 1782 times.

This was what it looked like before I bought it. They did'nt know if the engine worked but they said the hull was good, boy were they wrong.
This was what it looked like before I bought it. They did'nt know if the engine worked but they said the hull was good, boy were they wrong.
Viewed: 2012 times.

checking out the transom but it turned into a can of worms. I couldn't belive that all of the plywood in the boat was just 4"x4" squares glassed together even the transom was peiced together. They must of had a deal with a wood scrap yard.
checking out the transom but it turned into a can of worms. I couldn't belive that all of the plywood in the boat was just 4"x4" squares glassed together even the transom was peiced together. They must of had a deal with a wood scrap yard.
Viewed: 1933 times.

I started by cutting a 2 foot section from the back and saw the stringers were gone so I kept working forward until I got to solid wood.
I started by cutting a 2 foot section from the back and saw the stringers were gone so I kept working forward until I got to solid wood.
Viewed: 2727 times.

as you can see the bulk heads were rotted also the boat took a pretty hard hit in the front because it had a crack down one of the steps on the hull and that impact broke the stringer in half which let the water in and rot take over, not to mention Florida carpenter ants got into the wood stringers and transom.
as you can see the bulk heads were rotted also the boat took a pretty hard hit in the front because it had a crack down one of the steps on the hull and that impact broke the stringer in half which let the water in and rot take over, not to mention Florida carpenter ants got into the wood stringers and transom.
Viewed: 2013 times.

this is a picture of the new transom which was made up of 3 layers of 1/2inch AB plywood, and epoxied together
this is a picture of the new transom which was made up of 3 layers of 1/2inch AB plywood, and epoxied together
Viewed: 1868 times.

This shows the three layers of plywood epoxied together and also to the back of the hull
This shows the three layers of plywood epoxied together and also to the back of the hull
Viewed: 1746 times.

DSC00298
DSC00298
Viewed: 1765 times.

DSC00296
DSC00296
Viewed: 1669 times.

Powered by Gallery v1 RSS