Recent content by bksah2

anyone know the top speed you can expect with the merc 470 motor in the v20

Good Deal on a v http://cgi.ebay.com/ebaymotors/1985-Wellcraft-V-20-Steplift-206-Used-Cuddy-Cabin-Boat-Texas-/121090988834?pt=Power_Motorboats&hash=item1c3195db22

Hi guys ,I have a question about props and tubing I was told that a lower # pitch will be better for tubing I was running a 13 1/4 x 17 on a 115hp johnson while tubing, I had a adult on the tube and was having trouble getting him out of the hole abuot 30 seconds into the ride my rpms shot up...

Any one ever use oxalic acid for cleaning the boat deck its suppose to be a great fiberglass cleaner

How can you tell if the antifouling bottom paint on a boat is a hard or soft paint,, and does it matter when recoating the paint do you have to use hard on hard ,,,,soft on soft or can either be top coated with the other

I Know its been talked about before,, but just want to know if anyone has used BioBlast 9051 stripper before ,,,check out the youtube on it http://www.youtube.com/watch?v=B9w1GHVzqC0&feature=related

WOW I just drained the gas that is only year old...I cant belive the water that the ethenol sucked in ...for how on no more toping off the tank for winter .. i will drain/run it dry for the off season...had about 3/4 tank of a 40 gal. tank with about a gallon of water in it and i treated it with...

Hey all, I have an older (1980ish) 140hp Johnson. The power Tilt and Trim is bad. I tried to remove it. I got all six bolts out but can not get the main piston rod out. I took off the two c pins and thought it would just push out but after several attempts with a hammer trying to beat it out...

I picked up a older metal 6gal tank at a yard sale ,,tank has a little rust inside ,,should i trash it or is there a cheap way to clean it and coat it so the rust does not return ,,, when i would clean a aluminum tank i would just throw in some nuts and bolts and acetione shake and clean never...

Looking for a used starter for 1984 115hp Johnson outboard let me know THANKS

The Capacity plate is missing on a 18' cc fisherman that i just picked up any ideas of its info ,, (Hp, Persons ,total lbs) and any idea how to replace it..

Heres something that a little odd ,,I picked up a 115 Johnson 1993 I have replaced the thermostates and clean all the water passage ways under the head covers put the head covers back on,, left off the the 2 small hoses that go to the thermastate houseing to see what kind of water flow i was...

WoW,,Helped a buddy pull up the floor on a 1986 manatee 19'... To my surprise the boat had 5 stringers and they are made with a full 2xlumber the boat seem to be build very well anyone ever see full 2xlumber used as stringers

Hey Guys ,,This may be dumb but I see that some 2 cycle oil is different in color,, they are both TC-W3 ,,, one is green in color and the other is blue in color,,, does it Matter and can they be mixed.......THANKS :fight:

Wisk I had $2500 qk477-2888010137@sale.craigslist.org