Reposted to Boston
Thanks to all on the V20 site for the advice over the years. Time to move on to something a little bigger.
http://boston.craigslist.org/gbs/boa/1214788631.html
Here is a link for INCA molded products- they were the OEM for tanks on the 92 Vs-- can't say if they provided tanks before or after but thought this might be useful. I was able to find the model and serial number LABEL on the the top of the tank. Had some seepage around the sending unit and...
My 92 has a good sized in-floor fishbox with a drain that is connected to a factory installed RULE 500 gph livewell pump located in the bilge area. IN theory, the pump is supposed to clear out any standing water in the box. The problem is that the through hull outlet is about 10 feet away near...
Am looking to add a second battery to my 92, from what I can tell, it looks like the second battery would go right next to the first in the rear starboard well.
Any idea where the factory would have originally installed the battery switch? Am thinking it would have also been in the well...
Looking for suggestions as to how to best remove striping and chewed up graphics from from 92 V20. Has any one done this?
I know that the gel coat underneath is going to shine like the sun compared to the rest of the hull- have never buffed out the hull before but am game to try if this is...
my 92 V20 came with a factory livewell mounted under a lid in the stern. Am in need of a couple of replacement parts.
There is supposed to be a highspeed pickup that is used to fill/aerate the livewell while the boat is moving.
The flow is controlled by moving a lever mounted on the inside of...
My 1992 V20 has a single battery located under the baitwell in the starboard side of the transom- it looks like there is plenty of room to add a second battery- The 1992 v20s had second batteries as options- anyone know where the battery switch should be located? The transom looks like the...
Newbie - to this forum- I Bought a 1992 v20 with hydraulic steering last summer and am wondering if the is any way to do the following:
1. Is there any way to take up slack in the steering?- it seems like there is about 2 inches of play in the wheel before you can actually turn the motor to...