Recent content by reodds

Hi Everyone, I have an '85 V20 with a 150hp Yamaha outboard. In doing my spring (if it ever gets here!) prep, I noticed that the drain hose on the starboard outside drain needs to be replaced. Unfortunately due to my short arms and ample stomach girth, I am unable to get to the fitting...

Does anyone have a Seastar 1.7 HH5241 or HH5291 tilt helm they want to sell? I only need the helm, not the rest of the gear. I have a fixed unit (HH5271), and want to get the tilt version. I realize that they are available new, but I can't spend the $500+ right now. Thanks!

Hi everyone. I am facing a dilema and need some opinions from the experts. I have an '84 V that is running well. I have to repair the deck cover over the tank (it has a small soft spot), and was wondering if this would be a good time to replace the fuel tank? The tank itself, which is...

A lot of questions on the forum tend to deal with repair or replacement of teak parts. Does anyone know of a source for teak lumber that can be used to fix the problem area that does not cost more than the boat?

I have some fiberglass repairs I would like to do, and want to color the epoxy gto match the hull color. Has anyone had experience using a small amount of latex paint as the coloring agent? My rational for this is that I can get a custom matched paint at my local store a lot easier than...

Does anyone know a source for the black plastic trim moulding closest to the deck on the bow side of the windshield. One of my pieces is missing, and the other is cracked. Thanks!

The rod boxes on my '84 V20 are horrible looking, and replacing them is not financially feasible right now. I successfully repaird all the cracks and holes with expoxy and fiberglass, and the external portion now has a nice even surface. Has anyone used Krylon Fusion paint on them to restore...

Hi everyone! I am a fairly new member of this forum, and just got my second V20. I really appreciate all of the help and support I have received, and hope to return the same to others on an ongoing basis. My only problem is that when responding to answers from members it is awkward at best...

I have to remove the cover over the gas tank - to check it out, and reinforce if needed - What caulking/sealant do you recommend when replacing the cover? Is a silicone (like GE Bath and Tub) o.k., or should I go with Life-Caulk or an other sealant? Thanks

Hi Everyone! I am a newbie to this forum, but have been a boater and V20 owner for many years. My first V20 was a 1979 I/O which I sadly had to sell several years ago. I now have the opportunity to purchase a 1984 model in o.k. condition, with a 2000 Yamaha 150 2 stroke. It needs some...