Recent content by Stevebbc

I'm sure others have this combo but wanted to post how happy i was with it. The boat had the original 150 BlackMax and I chose the Optimax cause It is only around 70lbs heavier than the Black Max.. This was an extremely easy repower. The Opti can use the same controls, fuel line, t&t, etc. as...

Never seen a screw in gas tank vent in the side of the hull near the fill hole like this 86 CC has. Always seen a screen vent with the screen facing down and towards the stern on other boats. Do you guys screw it down tight or leave it slightly open?

Does anyone know if wellcraft had a standard color code for the boat harness wiring from the switch panel/fuse panel? Not the engine or t & t harness, just lights, bilge pump, etc.i just bought an 86 cc v20 that has a lot of wires under the console and exiting the conduit coming out at the stern...

Just bought this boat and it is in fairly good shape except soft spots in floor. i have a set of used trim tabs I bought and if I mount them in the optimum location, the hydraulic fittings and lines for the actuators will go thru the transom and be exposed in the splash well to salt water. If I...