Recent content by stuarbc

Selling my V....pass along to anyone who may be interested http://mobile.craigslist.org/boa/2791396082.html

I was having some issues with water in my gas tank.....thought I wanted to wanted to replace it.....ran across a good deal on an aluminum tank pulled from an old V20. When I got into it, I realized that my tank had already been pulled and replaced with a plastic tank....and was probably leaking...

I found a guy willing to sell me an aluminum gas tank that he pulled out of a 86 or 87 V-20 CC. He is selling it for cheap...so I think I am going to pick it up regardless. But was hoping to find out if anyone know what the dimensions for my 89 dually were so I could determine if these would be...

Finally breaking down and selling my V-20. It is a 1989 Dual Console with a 1989 Yamaha 135. The motor runs great....just put new carbs on it (thank you ethanol!) I bought the boat about 2-3 years ago and the guy who owned it before me had done lots of work on the boat. Unfortunately, he had...

My 89 V20 Dual Console has a door in the front of the boat on the anchor hatch...and two in the back under the little teak seats (that noone's butt can fit on)...where I keep my batteries anyway...The doors are a black plexiglass and have the Wellcraft emblem on them....however they are really...

Sounds like he is trying to get rid of it fast... http://mobile.craigslist.org/boa/1190242089.html

so I finished all of my "planned" winter projects for the boat and went to take it out for the first time and have a new issue... My 89 Yamaha 130 is choosing when it wants to and doesn't want to start....apparently my CDI unit is failing....it is randomly not sending voltage to the coils...

Spent the last few weeks working on getting the non-skid down on the deck. Spent about a week on all the prep: taking out all of the screws for the hatchs etc, drilling out, marine-tex, sanding. Then I spent all night Thursday sanding the deck.....cleaned, taped, and painted Friday. I am...

Has anyone replaced the trim around their consoles? Mine is cracking and falling apart. I would like to replace it but I am not sure what to use. My first thought would be starboard but I am not sure how to cut it to look like trim....... Here is a picture of what I am talking about

http://mobile.craigslist.org/boa/1096630591.html

Told you guys I would try to get around to posting some updated pictures... Removed the rotten hard top and installed canvas sanded and oiled the teak New starboard hatches for the whole boat Installed black starboard around throttle area next project is to paint the deck with Durabak

So this weekend I removed the rotten hard top that was on my boat when I bought it...and replaced it with a canvas. The old top was bolted to the tower so I now have open holes all around the top......What should I use to fill the holes....I was thinking silicone.

My 89 v20 dual has some type of black paperlike covering on top of parts of the console....it has began pealing up and I wanted to replace it but cannot figure out what it is or where to purchase it from.....anyone have any information or ideas.....you can see it in the picture below

Hey guys, I have a 89 Yamaha 130 using dual lever throttle and gear control. Therefore, the trim button for the engine is not on the handle of the throttle as in most cases....it is actually mounted on the dash panel and the switch is old and needs to be replaced...but I cannot find new...

Hey guys! I was hoping someone may know something about where I could get some good decals made. My friend is in Graphic Design and I had him design me an awesome design for my new boat name....and I am hoping that there is somewhere that I could take that design and have the sticker decals...