Search results

Found a local shop that sells stuff and teaches you to dive. was thinking of doing it with my son. But have to wait till next year, he has to be 10 years old.

Anyone ever shopped there? They just bought out 8 field and stream stores. One is close to me, I haven't stepped foot in f and s stores or dicks since their anti gun stuff started. Im going to check this place out soon.

Anyone here into trapping critters? Im going to start this year. Probably just raccoons, fox and maybe coyote. Im going to a public sale tomorrow with a lot of traps but I don't know very much about it yet. My 7 year old son wants to try it and he doesn't have to be quiet trapping!!

Going camping at lake and shore campground, oceanview nj. Taking camper so I can only take my canoe or small aluminum boat. Just need a place for my 7 year old to catch some fish and crabs. Any public boat ramps or fishing piers close by? Or do I surf fish?

$1300 I don't know anything about it. not mine, just looking around. If I was smart enough to post a link to it I would.

anyone use rustoleum bed liner? I am restoring an old IH scout for my dad and wanted to use it on the inside. It will not be used hard, probably only get 1000 miles a year.

98 force 120. I am replacing the water pump impeller. Lower unit is off. I was going to shift it by hand but it is stuck in reverse? THe shaft moves a little over a half turn. Seems like the shaft on the motor moves about a spline width back and forth. THis motor has a splined shaft that...

Dual console v20. steering seized. pulled the cable #ssc6214. Before it seized I had some snap crackle pop under the wheel. Im thinking of replacing the helm and cable. Do I go with Teleflex or something else? its not fun to pull the cable, Had to cut it. Going to pull the shaft the motor...

Going to kiptopeke state park the 1st week in aug, its just above the tunnel. Might take the v if I can figure out how to get it and a camper there. Or my 12 aluminum boat if not. Where and what do I fish for? I don't want your secrete spots for monster fish, just want my 6 yr old to catch...

90 hp 4 stroke on a pontoon. It has a stumble at low rpms and I was thinking of pulling the carbs off and cleaning them. But cant find a carb rebuild kit. Buying all the o rings and parts from merc is expensive. I really don't want to clean everything and reuse float and intake o rings. Any...

I need a prop for a 24 ft pontoon with a 90 hp 4stroke mercury. The # on the prop is M?8 77338A45 11P. Im guessing its an 11 pitch? THe boat is used on the Susquehanna river, pull a tube with 1 person on it a lot. I think the boat could use some more top speed. What pitch should I be...

Trout season started last weekend. My wife caught a 20 incher! Now she is addicted. She fished every day this seek except for 1. My son is 5 in a couple weeks. If we fish from shore he runs around reeling in everyones fish. On the boat in the small lakes I use my 1965 Montgomery ward sea...

04 merc 90 hp 4 stroke. When do the valves need adjusted? Timing belt replacement? Im helping a friend out getting it ready for spring. its on a pontoon boat. It gets ran a lot on the Susquehanna river.

87 dual console. I have a soft floor under the main seats and between the consoles. Found where the water came in. the console had a break in the fiberglass at the bottom corner where it leaked in to bare plywood! It has fiberglass under it, so it held the water in. Im thinking about...

I have a 69? sears 3.5hp outboard. It needs the propeller shaft bushings and seal. I tried sears and its no longer available. I can probably just replace the seal and be ok but i would like to do the bushings if i can find them.

I will be going to assateaque island for 5 days and i will not be taking the boat. I was going to do some surf fishing but never tried it before. What do i need?

I have a 86 v20 . The trailer has rollers on it right now and its a pain to get loaded up straight. It seems like the rollers hit the ribs on the boat, I looked at it and if I adjust them I still think it will be a pain to load. Would I be better off running 2x4's with carpet and getting rid...

Taking the boat down the weekend of the 11-12th. Whats biting? Probably staying in the bay, I have only had the boat out a couple times and not 100% confident in it yet.

I have a 1986 mercury black max 175. I need the oil pump arm, it goes between the oil pump ans throttle linkage. Its getting worn out and I am afraid its going to fall off. The local boat shop says its no longer available. Any ideas where I can get one?

I have a 86? v20 with a 175 hp black max outboard. I just got it running good and took it out last weekend. I am going for a weekend fishing trip aug 11-12-13. I have a water pressure gauge, new fuel lines, filter, new battery and I am rewiring everything right now. Bilge pump works. Is...