Search results

Model: 2004 Yamaha 150 two stroke model TXRC Which spark plugs NGK BR7HS or BR7HS-10? I believe it is the same plug only the -10 is gapped differently. Anybody know which I should get? Pretty sure my motor has BR7HS in it now but I'm at work. Worst case I can look when I get home tomorrow...

Forecast called for a decent weather window so after careful consideration, made the call to head out for some bottom fishing Sunday 5/4. Two buddy's headed down Friday and I loaded the boat and headed down Saturday afternoon. Hit the sack around 10:30ish and up around 4:15 am and had to make...

Just slightly too rough to head offshore.... Fished on my buddy's boat in the creeks. He fished solo on 4/17 and found some good red action which he put me on the next 2 days. Landed a total of 10 or so and a couple lost. Five in the slot. Also a few short flounder. It sure did get...

Anybody connect the wires (NMEA 0183 or 2000) between the units to enable DSC? If so how did you connect the wires? In my instance they aren't long enough plus they are just slightly larger than a human hair (ok maybe a little bit bigger than that). I am curious to know how to do this the...

I have an older 18 - 20 gallon tank, possibly Moeller, unsure of mfg. It is a below deck tank and I would like to modify it to use above deck to extend the range on the V21 which has the 60g below deck tank. The dimensions allow my spare tank to fit perfectly under the bench seat. The tank...

Saturday, 8/31 Headed out with a crew of 4 fishing buddies. Made good time on slick seas. Ended with triggers, grunts, bsb, and pinkies. Sunday, 9/1 What a difference a day makes. Headed out with a crew of 5 including my daughter and buddy's wife. Beat our way out and back in...

Watched the weather and made the decision at the last minute to head offshore on 8/3 for some bottom fish. Three of us aboard Blue Runner. Pretty much the same report as last time except got a couple triggerfish this time and the seabass were a little bigger - 15" - 18". Fished 4 or 5...

After recently repairing my trailer and seeing a decent forecast me and friends/brothers Cory and Garrett made the last minute decision to head off the coast of SC to do some bottom fishing. A front lingering about 60 miles offshore made things a little interesting but we ONLY ran out 45 miles...

Better late than never right? Stayed in Hatteras Village from 5/21 - 5/27 with 3 of my good friends. Such a wonderful place. Someone once said if you listen to the weatherman there you would never go fishing. It is rare to ever see anything below 15 knot winds and 3 - 5 ft seas in the...

I want to replace my trailer hubs for peace of mind on long towing trips. I have a 2005 Venture dual axe trailer....w/ my V21 sitting on it......I was looking at the galvanized Super Lube hub kits. Looks like they get pretty good reviews and the install could not be easier...comes pre-greased...

This looks pretty dang good. Check out the goodies - newer trim tabs, Garmin chartplotter, etc. This boat has a future with somebody..... http://winstonsalem.craigslist.org/boa/3546380377.html

V20 made #37 on the list. http://www.saltwatersportsman.com/gallery/photo-galleries/2012/12/top-50-fishing-boats-all-time

My 12 year old daughter wants a bow and arrow for Christmas. Not for hunting, but for target practice.......I think she really digs that movie Hunger Games....apparently! Anyway, I see Walmart has a couple. I looked at the "Bear Archery Youth" set. Problem I see there is people were buying...

Need some help. I am installing a small woodstove in my V21 cuddy for those cold winter days. I would like suggestions on where to mount, where to run the flue and of course, where to stack 1/2 cord of seasoned oak. On top of that, my stripper pole is starting to oxidize (near top) from...

Fished in 65' (30 mile run down there) with my BIL, my nephew and 2 of his friends - all 15 and full of piss and vinegar! Managed to get on top of some fish. Not on fire but we picked some out before it was too late. Ended up the day with 16 BSB up to 16".

Need help with a buddy's 1983 Johnson 15 hp tiller steer. Motor runs and idles strong. The problem is sometimes when running near WOT, when you go to back off the throttle she cuts out and cuts off - even when you gently pull it back (most of the time) while pumping the bulb. I've suggested...

Ok guys, I need some help. I have not begun to look into this yet as it just popped up a week ago but here is my issue. All of a sudden my throttle mounted tilt/trim switch is not working when tilting/trimming up. The down still works fine - as does the tilt/trim switch on the engine, works...

Have ya'll seen Michael Phelps girlfriend? :pic:The man is a genius. I start my swimming lessons next Monday. :sly::fam:

Destroyer - since you are the only person I know who has first hand knowledge of the V21 floor, wanted to ask you about the fuel hatch. I thought this "hatch" was bedded into place, but after feeling under the floor (via 8" inspection hatch) it seems there is no hatch after all. Feels like the...

I suspect I have a ball valve in the hose barb. I want to replace it with a regular hose barb. Took off the fule line and I put a wrench on the hose barb itself. It kinda torques to the side and does not budge. I noticed a large metal nut at the base of it. Do I need to find a large wrench...