Search results

I saw this one on the hull truth today. http://www.thehulltruth.com/forums/thread-view.asp?tid=154707&posts=4

I need to know what my boat actually weighs. It has a 150 hp 2 stroke and carries 40 gals of fuel. The 76' catalog shows the boat to weigh 1,920 lbs, I'm assuming that's dry weight with no motor. Thanks in advance guys. Scott

Well after alot of thought, I think I want to sell my 76' cuddy and get something different, a newer late model center console. I know there's been alot of what's it worth post lately, but I want to know what you guys think it's worth. Some of these pics are a couple years old, but thety are...

I saw a local add for this boat the other day. 76' cuddy, new trailer, hardtop, 225 Evinrude needs work. I talked to the owner briefly and got him to send me some pics. Here's my deal...I need a new trailer and would love a hardtop. This is a one year old trailer (single axle is what I want)...

Iv'e been to busy to check in you guys lately. Been working like a dog. I'm down in Fla. for the weekend. Who is near Ft. Lauderdale that can take me fishing in the morning ;) ;) ;) ;). Just figured I'd say hey while I had a chance. I hope everyone is behaving themselves. Take care, Scott

MJ, I just wanted to say how much I enjoyed your video at the bottom of your signiture. I don't know how long it's been there, but I just noticed it. That song always has hit me in the soft spot. If you guys haven't seen it....check it out. PS: If I'm way late on the whole subject, I apologize.

I took my two little boys, my sister and my niece and nephew out on the York river last night night to see the fireworks. Yesterday was Yorktown Day( when/where the Rev. war was surrendered) Absolutely the best fireworks Iv'e ever seen, best seats in the house too!

I wanted to try the prop from my old 140 hp V4 onto my new (used) 150 hp V6. Well...... it fits. I was told I definatley needed a new prop, so I purchased one, here's my thoughts. Iv'e heard some V4 OB's are commercial and have V6 gearcases. My old model no is: E140TLCOS. Does anyone have any...

Did I read somewhere that vacuum cleaner hose has been used for wire loom connecting all the cables and stuff to your outbard. Show me some pics if you can, I want to do this to mine.

;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D Get your minds out of the gutter! We took out the boat last night after work, this was the first fishing trip with the new motor (sorry no underway pics, the camera battery was dead). It performed great. Logged 35 miles on my GPS, filled up...

<---------------------------------------(god status)

Had a great day on the river with my two boys, my sister and my niece and nephew. We were tubing and just running around for a couple of hours. Well on the way back towards the boat ramp my motor picked up a bad knock, I slowed down and eventually it stalled. I pulled the heads off today to see...

Well, I finished wiring up my gauges, stern light and bilge pump late last week. I was trying to get it done so I could take my Dad out fishing with my two boys. I was able to get the boat to where I could use it. We went and caught a nice mess of croakers. This was the first time my Dad has...

http://adcache.boattraderonline.com/6/6/4/82544264.htm

I was searching the net for radar arch stuff and stumbled along this V-20. I really like that set up of that one posted the other day with the bimini atached to it.

Well, I bit the bullet and cut my old Tach wires. Drilled the holes and flush mounted my new fishfinder. Once that was in I decided that the black plastic dash needed to come of and get the holes filled and painted. I'm going to try and fill the old screw holes with epoxy.

Hey guys, I'm sure Iv'e ask this question before but.......I'm getting ready to re-mount my "gunrack" style rod holders up against the gunwhales inside the boat. I want to know if it's o.k. to screw to the bulkhead just forward of the fuel tanks (76' model). Thanks, Scott

This may have been posted already.......It's hard to keep track? http://adcache.boattraderonline.com/6/9/1/82219191.htm

Hey guys, I seem to remember someone posting a "general" boat wiring diagram on this sight awhile back. I going to be rewiring my boat here in the near future and I figured it would help. Does anyone have one? I am going to install a new tach and maybe a few other new gauges. I have a 2 pos...

Well I told ya'll I would take some pics of the boat over the holidays, here they are. I had a great vacation with the family.