Search results

I wanted to know how much I should expect to pay for a new set of controls for a 1994 150 HP Evinrude Ocean Pro, newly rebuilt with old junky controls?

Newly rebuilt 94' evinrude Ocean pro, just finished break in last season. have about 2 hours on it this season running regular fuel ( no double oil for break in ) the controls are from 94' mechanic still has to fix them the fast idle lever never worked. the problem I have, is now that I can...

Got a new Optima Blue top battery this year went out and noticed when going 2000 or more Rpm's my voltmeter ( new ) goes up to 17 / 18 volts. Checked it with a known good meter at the battery while underway. sure enough it read 17.5 V. Didn't have this problem last year with old battery, I...

Guys, I have a question about which direction to turn the little trim tab on my outboard to counteract the torque of the prop. the boat really pulls to port when I hit the throttle. right now it is turned slightly towards the starboard side. I know I can do it by trial and error, but figured...

Is it normal to have a little line of oil coming out of the cover seal of the outboard after it has been tilted in the up position for a long time ? The outboard was rebuilt and I only put 10 Hrs. on it last season running double oil. Just ran it for the first time the other day. Took a while to...

Can anyone tell me a safe way to remove tree sap from my brand new clear glass windows in my canvas enclosure? It is also on top of my bimini. Thanks.:head:

I have a150 hp Ocean pro (E150EXERV) 1994 When I go 3,000 rpm's or higher I hear a rattle, been driving me crazy, thought it was my newly rebuilt powerhead. Well I found the noise to be the water forcing against the trim rod on the midsection which moves around sloppily. Question, Do I need that...

I have a150 hp Ocean pro (E150EXERV) 1994 When I go 3,000 rpm's or higher I hear a rattle, been driving me crazy, thought it was my newly rebuilt powerhead. Well I found the noise to be the water forcing against the trim rod on the midsection which moves around sloppily. Question, Do I need...

My question is -- Does the 94' stock controls have a fast idle lever ? I had a 94' 150 looper rebuilt and installed with controls, the controls were very used looking and the mechanic told me I really don't need the fast idle lever, ( not working ) that the motor starts up with higher rpm and...

Just got my new ( rebuilt ) 94' looper 150 have about 4 - 1/2 hrs on it running double oil not exceeding 4000 RPM ( as per mechanic ) I have a 74' v20 with aluminum saddle tanks (20 gal ea.) I ran all new fuel lines with a stainless fuel/water seperator, installed an in line fuel valve on each...

how do I find out if Johnson made a 150 HP Looper style in 1995 ?

Installing all new gauges for a newly rebuilt 94' johnson 150, don't know which is better water temp or water pressure? how does the pressure read ? Is there a spot on the engine for a sender for temp ? can anyone help

Can anyone tell me how important is it to put thread seal on the screws that hold down the sending unit on the fuel tank ?

Has anyone experienced the underside of the bow platform seperating ( roof of cabin ) on a 75' v20 ? Was wondering if this just happened because of age or when my boat fell off it's blocks this spring.

I'm just installing a whole new fuel system ( except tanks ) to a freshly rebuilt 94' Johnson 150. Installed the Stainless water seperator bracket, looking through my Jamestown boatbuilding cat. trying to choose the right spin on filter. 2 questions : 1. read somewhere that the 10 mic filter...

Well I think I may have found the best deal FOR ME. In talking to all the local marinas, I keep getting forwarded to this one in particular for rebuilds. Looked out of state but what good is a warranty out of state. Here it is: 1994' Johnson 150 HP looper being rebuilt as I type. Motor and...

Ready to put the boat in soon, can't do a custom canvas cover this year, any suggestions on a cheap cover for 1 to 2 years? 1975 V20 cuddy

Any thoughts on this motor for $3,700?

looking at a 1999 200 merc ( rebuilt ) ant ides what I should see as for as numbers with the compression check ?

looking for used outboard 150 - 200 HP 25" shaft