Search results

Sold! Everything is the same but I took the new Vhf out for the new boat. My Grady is here and I'm not loving two boats in the yard. (it is kinda cool though***55357;***56832;) **************************************************************** Hi guys. I toasted a rod bearing and piston in my...

Ok guys get in the car quick! Just got back from walmart and purchased 5 gallons of Pennzoil full synthetic 2 stroke oil for 3 bucks apiece.:sun: Yup, that's right three dollars a gallon. It's normally $27. They must be trying to get rid of it, all of these were obviously left over from last...

We went out sunday to try for a few more tog, between showers and in the predicted 2 foot waves. Of course, the showers didn't show up until we were heading in and the 2 foot waves were really 2 inch waves.:sun:. It's nice to be on the good side of the forecast for once. We hit Narragansett Bay...

I recognize this but whose was it? Anyone know? http://providence.craigslist.org/boa/2365553558.html

We Hit the tog hard today. Great first real fishing day. Ended up with 12 or 14 keeper tog, released all, most 19 and 20 inches with the first fish of day largest at 22 inches. A couple shorts and two tiny chogies, bait stealing bassturds! Narragansett Bay, if you know it well you will know...

I'm trying to update my Gallery and it won't except my password. can I get it reset?

I saw this at a dealer in N. Attleboro, MA. last year or 2009? Thought you guys might like it. Not the best pictures. Kind of funky looking! Maybe not in a good way either....:zip:

Just some pictures from last year. Looking thru the phone getting in the mood for this season. Father inlaw's 32" FLUKE Father in law Block Island Stripers Block Island twins Smitty's Block Island Stripers Smitty not impressed Smitty kissing (b)*** My Block Island Stripers (nice...

Here is my quicky anchor roller and mini pulpit. I picked the roller assembly off ebay pretty cheap it ended being a little smaller than I thought, but it works well. The pulpit is a piece of Trex decking (what else?, ha). The Trex flexes a little when pulling on the anchor with the motor, I...

The best mod in my opinion! Bolster seats! Very comfortable, and you can stand and lean or sit and bounce. Great for all conditions. The seats are from Flounderpounder, I think. They were new surplus and came out of a 110 thousand dollar Searay. Very high quality. I made the base it's just...

Here is my bench seat I made, again out of Trex. I "borrowed" from some other designs that were posted on here before. The whole thing is removable with two pins. It is very strong and sturdy, but also really heavy. Maybe 70 pounds? I haven't weighed it, but it is a chore to take out of the...

I'm going to catch up on some projects I did to the boat last year and late 2009. I've been neglectful! sorry guys. Here I redid the swim platform, replacing the broken teak with Trex decking. It's held up very well for two full seasons now and looks mostly new. And is much sturdier than the...

I got a new (rebuilt) 150 merc installed this spring. I've been having overheating problems since day one. The motor guy is fixing the problem but, he is getting stumped and i'm getting frustrated. The motor overheats between about 1300 and 3000 rpm. The pisser works the whole time, until it...

It's fishing weekend and my tilt/trim unit stopped lifting last night:cry: (on the way back from some stripers at Block Island:party:). 1993 mariner 135. The unit will not lift or trim up. It goes down fine. I can hear the solenoid click to engage the pump motor to go up just nothing happens...

I finally got the V out today for the first time this year. Did a bunch of work this year. cleaned carbs, water pump, durabak, new swim platform, anchor roller, etc... I'll get some pictures out to you guys this week. My problem is my 1993 135 hp merc/mariner was having some problems today...

'93 mariner 2.0L 135hp Motor is in neutral Pulled the lower unit off for winter (sat in basement for cold weather) did water pump, lube and such. And now I can't get it to slip back in. It slides in until the drive shaft stops all progress. I just can't get it to do anything more. I'm about...

My 1984 v20 has 2 below water line thru-hulls on each side. One is for the cockpit drain and the other is for the in floor fishbox overflow. the fishbox thru-hull is one size smaller than the floor drain. Do you guys know what size fittings they are? I was thinking 3/4 or 1 inch for the fishbox...

Has anyone found a source for the little rubber donuts that stop the center windshield from smacking the passenger one when in the open position? One of mine is missing and the other is just about gone.

I want to give props to csvencer, as I used his dash panel as a rough template for mine. The panel is 1/4 starboard. I didn't flush mount the GPS so it is easier to remove for security reasons. If you guys have problems seeing the pics I'll try to fix it after work tomorrow...

Anyone know how long the fuel fill hose is? Mine is cracked and needs replacement. I can access it from the rod holder hole, however, it is jammed between the cap and a stringer and I can't get it out to measure the length. With the price of hose I'd rather not buy too much just to cut off three...