Center console guys, I need help

C

Curapa

Junior Member
I have lost the diagram that I had drawn with the center console location measurements. Would one of you mind measuring the location of your console relative to the transom?

Greatly appreciated,
Curt
 
Well I would measure but I'm 1000 miles from my boat.... I have a casting deck in front and iirc the front of my console is about 18" from it....

Honestly tho, I'd say forget a out how the factory had it and mount it wherever it works best for you.
 
Thanks, it's actually not going back in the factory location. I was hoping to get a reference to stock location so I know how far I'm moving it. It will most likely end up about 5-6" forward.
 
:beer:

Trust me, I am. Factory isn't an option on this one. With everything out of the boat it's hard to tell what it did, is, going to look like. I am trying to make sure the fuel level sensor hatch well be under the console and its hard to get an idea without some stock measurements to go off of.
 
just got back in town I will try to go down to the dock and look at mine 1994 v20 center console. tell me me what you need and I will get it for you!
 
Daydreamer, I just saw your post.

If you can get me a measurement from the transom to the console that would be greatly appreciated.

Thanks
 
You must log in or register to reply here.
Back
Top