I/Os VS OutBoards

  • Thread starter Thread starter fishbonejr
  • Start date Start date
my well craft was my first boat but that was in 1990 and i have a 2004 aquasport explorer now two.
 
i dont normally but the aquasort was a really good deal so i jumped at it fast boat will do 55 knots WOT.
 
wellcraft v20 is a 1989 and i have pictures of both here are some

this is the only one i have on photobucket

100_0742-1.jpg



heres the name

100_0738.jpg


SEAJay is my granfather he was a cournal judge. so sea jay
 
That the Aqua you talked about.



Wellcraft will have to loose the bow rail for the ladder to work.

Got to go and check the Nitrogen bottle. Be back in 10 to 15 mins.
 
yeah on the left is the aqua Fishbonesr and my v-20 fishbonejr on the right.
 
my power went out for 2 seconds and shut down my computer darn wind

what nitrogen bottle are you a scientist i want a nitrus oxiede bottle on the v to see if i could turbo boost the power.
 
which one the aqua sport is about 29 feet and has a 9'8" beam the v-20 is 20'6" and an 8' beam do their both sea worhty.
 
yea its a fast boat for its size. i have to run it at full throttle for 10 minuets every time i take it out fishing becasue the carbon builds up on the cylinders and that is the only way to get it off or else i will be buyin two new out boards and right now if i had to do that i would sell the boat un powwerd. but when at full throttle everybodys eyes just pop out on other boats when i pass them its kinda funny.
 
the v because it is actuly a smother ride than the aqua and its a cruser not a fisher so its relaxin to take it out.
 
yea but i stopped after it made them run at a lower rpm than reccommended and even though their under warrenty if they blow for carbon build up yamaha will not pay for it so i need to do everything by the book.
 
yup so thats what i do. and i burn 55 gallons an hour while doin it to.
 
Back
Top