I screwed up, maybe?

S

steplift20

God
I removed the rod box on the starboard side cause it was damage
I fixed it pretty good so I painted it. Came out great. BUT. There is always a BUT. The color is wrong. I 5hought it was off white but it’s not. A
It should have been white. So now I have two different colors but I like the repaired one better. So now I have to do the port side but I’m not going to brake it off. Just do some masking Dam I was so close to getting finished. But in all honesty I think it will look great. So let 5his be a learning exam. Check your colors. And check it again. And 5he spray paint I used is krylon 2 XX. From Walmart. Sticks to plastic. It cost under $6.00. Great stuff
 
I'm sure the rod boxes will come out great, post a picture if you can. I painted mine (1989 V20) with Rust-Oleum 207001 Marine Coatings Topside Paint, Quart, Oyster White. They came out decent, not perfect but I wasn't looking for perfection. My boxes were damaged in the corners and had a few wholes in the plastic. Used some polyester gel coat and chopped strand matte to repair.
 

Attachments

  • IMG_1581.JPG
    IMG_1581.JPG
    1.4 MB · Views: 12
  • IMG_1555.JPG
    IMG_1555.JPG
    1.5 MB · Views: 12
  • IMG_1564.JPG
    IMG_1564.JPG
    2 MB · Views: 13
  • IMG_1580.JPG
    IMG_1580.JPG
    1.5 MB · Views: 14
Last edited:
They look pretty perfect to me nice job that’s a newer boat, you don’t have teak trim? I used rustoleum XX2 from Walmart or Home Depot. It sticks to plastic. Came out great I just screwed up the color But I l8ke the color. I’m going to paint the port side box the same color.
 
You must log in or register to reply here.
Back
Top