Minimum setback for E-Tec 150

northernmainev20

northernmainev20

New member
Anyone able to tell me the minimum setback for a transom bracket when hanging the E-Tec 150?

I don't have an engine anywhere in the county to measure.
 
I would think any of the guys w/E-Tecs could measure it for you...except maybe Lumberslinger...Hey Slinger ...didja ever work out that problem w/ Clarence and those rod-holders??



Wonder if Evinrude has that number for you??...have you tried their site??... ;)


Or better yet one (or ten) of the bracket mfgrs ... tell 'em ya got the motor and need to know what set-back to order ... ;)
 
My bracket is an 18" and I could put a 150 on it if I wanted to (and could afford it ;))
The motor fully tilted 115 Johnson
Wellcraft2207095.jpg
 
reelapeelin said:
I would think any of the guys w/E-Tecs could measure it for you...except maybe Lumberslinger...Hey Slinger ...didja ever work out that problem w/ Clarence and those rod-holders??



Wonder if Evinrude has that number for you??...have you tried their site??... ;)


Or better yet one (or ten) of the bracket mfgrs ... tell 'em ya got the motor and need to know what set-back to order ... ;)
Click to expand...

hey reel not yet iam going to take it off mabe next week and see what i can do with it. :o
 
2ndchance said:
My bracket is an 18" and I could put a 150 on it if I wanted to (and could afford it ;))
The motor fully tilted 115 Johnson
Wellcraft2207095.jpg
Click to expand...



the 150 will not work on an 18" set back they have a deeper and taller hood than your 115 the 150's up need at least 27" to full tilt and have clearance.
 
Here is the only picture I have of my 150 E-Tec tilted fully forward sorry it's not from the side. When the bench seat is in place it does not come close to touching it. Billy Mac ;D

47.jpg
 
What he needs Mac is the measure from the cowling to top of motor, so that when he tilts it up on a bracket he can tewll how far away from the trasom he needs to be.
 
I'm back home now so I can't get that measurement. What I'm showing here is that with it tilted all the way up it doesn't go past the splash well if somebody knows the width of the splash well? Billy Mac ;D
 
According to the guy that works on my motor the difference between my motor and a 150 of the same year is 2 cylinders and 2 carburators which means the motor is taller. The way my transom is done ther is ample room for a 150 to fully tilt up. He had a 150 Ocean Pro under his shelter when my boat was there and he showed me that it would work.
 
Thanks for the input folks.  Looks like a 28" - 30 " floatation platform in my future.  Found a guy a counties away that has made some of them before.  No idea on price and haven't seen his work yet.  Two VERY BIG deciding factors.

I'm jealous of the fishing stories and pics.  Maybe I'll take my V for a paddle this weekend.    ;) ;) ;) :-/

paddle.jpg


0" setback required, just lots of beer..
 
My new system will idle at around 6 cans per hour, WOT is about 12 cans. Only problem is the support frame springs frequent leaks and won't stand up long at WOT ;D
 
You must log in or register to reply here.
Back
Top