NEW to V20's

H

Hedge

Senior Member
I just recently bought a 1973 V20 with a 1989 Evinrude 120 VRO, and a '85 EZ Loader double axle trailer. Hopefully it will turn out to be a wise investment, the motor is partially disassembled, why I don't know, neither does the current owner, he acquired it as payoff to a debt and know's nothing about boats.
 

Attachments

  • 20110518152920.jpg
    20110518152920.jpg
    83.1 KB · Views: 57
  • 20110518152754.jpg
    20110518152754.jpg
    52.4 KB · Views: 63
Last edited:
Welcome aboard...Nice looking V. A little cleaning and some TLC and you might just be up and running in no time. You definitely found the right place for answers to any questions you may have.:clap:
 
Hi. Welcome to the site. Most, if not all, your Wellcraft questions will be answered here..... (maybe not correctly, but answered)....:head:

Seriously though, there are some pretty smart people here with tons of experience with these boats. Anything from a 140 - 200 hp is a good sized engine for these boats, so you should be be fine with the engine you have, as long as it's ok. Cheers...:beer:
 
Just got her home, now the fun begins. I am looking forward to this. Guess I should tell my wife about her before she gets home. I am sitting here going through the paperwork that I received with her, It is nice that everything is documented, So I know what has been done,

Major work done:

Carbs rebuilt and major tune up in 2009 ( so why is the engine torn apart??? )
Transom replaced in 2003
 
Last edited:
Hedge said:
Just got her home, now the fun begins. I am looking forward to this. Guess I should tell my wife about her before she gets home. I am sitting here going through the paperwork that I received with her, It is nice that everything is documented, So I know what has been done,

Major work done:

Carbs rebuilt and major tune up in 2009 ( so why is the engine torn apart??? )
Transom replaced in 2003
Click to expand...

Provided it was done right, the replaced tranny is a major plus.. :sun:
 
Took the cowling off tonight and tried to figure out exactly what's missing from under there. I have been looking through posts of rebuilds and have come to the conclusion that the starter and fuel pump are missing, who knows what else. I am no marine mechanic but I am going to try to get her back operational myself. I know the power packs are unbolted and the heads are loosened, I will tighten them up and check compression and go from there.
 
Archer Lodge, just a few minutes from Clayton. Let me know sometime when you are heading 70 to the coast, I'd love to meet ya and chat a bit.
 
Hedge said:
Archer Lodge, just a few minutes from Clayton. Let me know sometime when you are heading 70 to the coast, I'd love to meet ya and chat a bit.
Click to expand...


going down either Friday night June 10th or early Sat morning June 11th for the Big Rock Tourn.
 
This is what I can see
 

Attachments

  • DSCF2057.jpg
    DSCF2057.jpg
    79.1 KB · Views: 12
  • DSCF2059.jpg
    DSCF2059.jpg
    49.2 KB · Views: 12
  • DSCF2060.jpg
    DSCF2060.jpg
    85.2 KB · Views: 13
  • DSCF2062.jpg
    DSCF2062.jpg
    96.1 KB · Views: 12
hum do you have the lower unit? first thing take the heads off take a pic of the cylinders lets see what those walls look like.
 
Skool, yes I do have the lower unit. Like I said It is completely torn apart right now, why I am not sure. It looks like someone just started taking things apart and didn't know when to stop. it will be Sunday before I can get additional photos.
 
Hedge said:
Skool, yes I do have the lower unit. Like I said It is completely torn apart right now, why I am not sure. It looks like someone just started taking things apart and didn't know when to stop. it will be Sunday before I can get additional photos.
Click to expand...

I was hopin' Skools would come to your rescue before you torqued those heads back down and tried restart...that could have done some damage by itself...you in good hands now though...better than Allsnake...LOL!!

While you got the lower unit off, go ahead and replace all water pump components..ALL of 'em...and make sure that new rubber impeller gets twisted in right...
 
Reel, I wasn't even going to try and torque them back down. I don;t even own a torque wrench. And I am pretty sure the should be "head gaskets" there that also seem to be missing. I am going to meet Skool next weekend and entrust his judgement to whether it is salvagable
 
Hedge said:
Reel, I wasn't even going to try and torque them back down. I don;t even own a torque wrench. And I am pretty sure the should be "head gaskets" there that also seem to be missing. I am going to meet Skool next weekend and entrust his judgement to whether it is salvagable
Click to expand...

:clap:...sorry...I musta misread your post...
 
You must log in or register to reply here.
Back
Top