Penn spinners....

charlie_the_tuna

charlie_the_tuna

God
So I’ve always used penn reels. I’ve always loved penn reels. I have a bunch of old USA conventionals that operate as intended. I took an old senator apart, cleaned, relubed and put a power handle on. It can pull your house off it’s foundation! I have a few penn spinners as well. A couple old USA and some newer Chinese. THESE REELS ARE SH!T!!!! I just returned a conflict II for warranty. It hasn’t been used 5 months. Some of the others are acting up and I’ll be dammed if I’m gonna dump $50-$75 bucks into a Chinese piece of crap.
What are you guys using? I have a spinfisher ss V 7500 that’s never seen water. It seems like a beast, but who knows if it’s gonna crap out on me after a year or two. I’m not looking to spend 3,4 or 5 beans on a reel.
Shimano? Daiwa? What?
 
Penn spinning reels have been my go-to bottom fishing rigs ever since I got into bottom fishing. I started with (and still use) a Penn Slammer 560. I pulled a ~100 lb tiger shark straight up off the bottom in 100ft of water with it on 80lb braid! Later I bought two Spinfisher V matched with Ugly Stick Tiger Lite 6' jigging rods. I'm pretty sure they could pull a VW Bug off the bottom and never had any issues with them.
 
Yeah, those spinfisher Vs, and now the VIs seem like well built reels. I bought the 7500 new like 3 years back, so while it’s still brand new in the box, the warranty is long gone. I’m gonna be pretty pissed if it turns to sh!t like the rest of the Chinese crap. Meanwhile, I’ll be down south next July and I’ll be abusing my old USA senator like it robbed my house. Can’t stop that dam reel!!
 
they are all made in china or the Philippines. read Florida fishing Reels( buddy of mine has them as a sponsor) statement about how they tried to make their product somewhere else, its a bit enlighten. I think ABU Garcia is one of the few that isn't. i have a few of the old ssg 4300 Penns that were great, except i cant get any parts for them( I need a drag knob). I have a nice Finn Nor that is missing a couple parts, its not that old, but the factory was destroyed by that tsunami a few years back in Malaysia , so no parts for it. I fish Penn Battle 2s mostly, they seem OK, haven't had any issue out of them, but now they have the battle 3, so I might not have any parts for them before long. I have a couple older Shimanos that are ok, I work on the Shimano Factory offshore boat(Shimano N America is headquartered in Ladson SC now) and have been trying to get a couple Stradics for some handmade trout rods I have with no luck, they aren't getting any inventory right now. I'm not spending $250-$300 for a trout reel. I've got 4 brand new Diawa BG series reels that are the smoothest thing I've ever handled, just haven't had a chance to get them wet yet(had them for 2 years now). I see Diawa has changed up their reels from when mine were made, they don't seem as smooth. I dont have an answer other than they are all overpriced and under built. BTW, anyone have any old Penn 2/0's, I'm looking for some Spanish reels
 
Spare, if u have a part number for the 4300 drag knob, i can check a local reel shop. They have a lot of out of stock penn stuff.
 
Shimano,get shimano ,I never had any issues with them , penn used to be the reel but that's when they were made in the USA and they are very heavy reels to me, I also have Abu Garcia bait reels made in Sweden and are very good reels too.
 
The number you gave was 052714. 52 is usually the reference number and 714 is the style number. The part number i come up with is. 1183834. This is on the 4300SS

Either way the guys were telling me eBay may be your best shot. One guy said he thought he might have a screw knob, but i told him it was the quick disconnect one.

If u could look at a schematic and confirm i am looking at the right number, ill keep looking for u

Also might try looking for a complete spool assy. 1183836

Sorry charlie, didn***8217;t mean to hijack your thread
 
Shimano calcuttas are very good for salt water and I have a few shimano spinning reels that are great too they are cheaper then buying cheaper reels cause they last for a very long time forever actually I own a bunch of reels but the shimano are the best. Charli dig into your pocket and dig some of that money you have stashed away no get one, you won't be sorry.
 
Update: sent my boy’s conflictII 3000 for service again. I included a note describing my delight with the Chinese Penns. They contacted me asking if I wanted to swap it out for a different, cheaper model. I asked if we could swap it out with the pricier model and I’d cover the difference. Well, the kid decided he wanted a shimano stradic 3000. Ok. I’m gonna get me a slammer IV 5500.
I must be a glutton for punishment. My spinfisher V 7500 has about an hour, hour and a half of fishing time and it’s already acting up. Unfortunately it sat brand new in the box for about 3 years before we spooled it up and let it go. Way out of warranty, but I’m learning a valuable lesson. Maybe not, since I’m willing to try another of these high priced Chinese pieces of sh!t. I guess we’ll wait and see what happens.
 
You must log in or register to reply here.
Back
Top