swimgrid for 93 v-21????

Redneck

Redneck

Junior Member
does any one have a v-21 with a swimgrid on there boat? I'm looking for options were to put the fuel tank for the kicker and woul like to keep it out of the way
 
For the kicker on my '94 V21 I put the 6 gallon tank in the splashwell without interfering with the tilting of the motor. I have the swim step on one side and the kicker/bracket on the other.
 
S2010011-2.jpg


0305011545.jpg
 
i've thought about simply t-ing off my fuel line and running a line to my kicker motor and eliminating the need for the extra fuel tank.would anyone know of any problems that could bring up?
bluerunner,good loking boat!
 
NICE boat :beer:
I pick mine up on Monday so stoked!!!!!!!!!!!!!!!!
I like your setup and will probably go with it then install a set of trim tabs. Do you have a set on yours and if so how much of an improvment was it on the water.
 
Thanks guys for the compliments.

I don't have tabs. It would be nice to have but I doubt I ever get em. I'm happy with the way she handles overall. I'm sure if I ever rode in one that has em I would probably want em. For now I need rods/reels worse than tabs. :beer:
 
jeffmo said:
i've thought about simply t-ing off my fuel line and running a line to my kicker motor and eliminating the need for the extra fuel tank.would anyone know of any problems that could bring up?
bluerunner,good loking boat!
Click to expand...

It's really not a good idea to run your kicker off the same fuel supply as your main. If your main fuel tank gets contaminated with anything you can always use your kicker to get home. But if they run off the same tank then you're screwed. :head:
 
thanks for the tips hope to get some more the next few months have to get my 93 V-21 ready for next years salmon run and huge Halibut in Prince Rupert :hide:

Boat safe fish hard!!!!!!!!
 
jeffmo said:
i've thought about simply t-ing off my fuel line and running a line to my kicker motor and eliminating the need for the extra fuel tank.would anyone know of any problems that could bring up?
bluerunner,good loking boat!
Click to expand...

That's how mine appeared to have been set up. But there was no kicker motor when I got it... just a bracket. So I removed the bracket and the three-way valve. Who needs a kicker when you can have Sea-Tow!
 
Hello All,
I know this may be a little off topic but Blue Runner, I see what looks to be a seat in the back of the top pic of you boat. Did you buy that or make it? I am getting my first V20 (super excited) next weekend and am looking for some ideas for additional seating.
Thanks!
 
Jersey Jeff said:
Hello All,
I know this may be a little off topic but Blue Runner, I see what looks to be a seat in the back of the top pic of you boat. Did you buy that or make it? I am getting my first V20 (super excited) next weekend and am looking for some ideas for additional seating.
Thanks!
Click to expand...

I'm pretty sure Blue's seat was factory.....bench seats have probably been done more here than any other modification....do a search for bench seats and you'll find these plus some...of course the best is mine which is the first link:fam:

Welcome to the site by the way....been a huge push of Jersey guys lately....we expect to see all of you, no matter how new you are in Barnegat Bay this summer for the annual get together....

http://www.wellcraftv20.com/community/showthread.php?t=11706&highlight=bench+seat

http://www.wellcraftv20.com/community/showthread.php?t=11757&highlight=bench+seat

http://www.wellcraftv20.com/community/showthread.php?t=12912&highlight=bench+seat

http://www.wellcraftv20.com/community/showthread.php?t=14169&highlight=bench+seat
 
Thanks! The bench seat is a factory V20 bench seat, but not from my boat. I bought it from a member of the site who hasn't been online for quite some time. Great guy....pretty much let me name the price and also gave me a custom seat cover for it. I have no fasteners for it which is why you see the bungee cord.....many a floor has been rotted due to bench seat fasteners - therefore I abstain!!

Matter of fact, right now it is out of service b/c the wood backing is rotten and the bolts pulled through on the backrest. Planning on getting some 1/4 inch starboard to refurb it with a wood-free backing. Just not a priority right now but it will be done sooner or later and of course I will be posting about it.
 
Here's a couple pics. I normally only use the bench for lake cruising but I used it offshore once and everybody enjoyed it.
S2010010-1.jpg

0407071200.jpg

S2010025-2.jpg
 
Thanks for the pics, I think I will be building one soon. I agree that the less fasteners in the floor the better. What exactly is starboard? I assume it’s like plywood made of plastic or something that won’t rot. Is it expensive?

Thanks again
(nice fish by the way!)
 
Yep, you nailed it. Here is more info copy/pasted from the interweb. The stuff is actually called King Starboard and also there are some knock-off brands that may be cheaper and just as good.

Original Marine Building Sheet
King StarBoard® is the original marine-grade polymer and the industry standard. It is the product of a proprietary process called K-Stran™, the most advanced manufacturing process available for producing consistently flat continuous sheets. King StarBoard® is environmentally stabilized to withstand the harshest marine conditions. It will not rot or discolor like teak and other solid woods, and it will not delaminate like wood laminates. King StarBoard® is easy to work with using standard woodworking tools, and design changes are a snap. In addition, the installed cost of King StarBoard® is less than teak, other common marine woods, and fiberglass. Plus, our large sheet sizes maximize your yield. Boat buyers appreciate King StarBoard’s® low-maintenance finish. Repair and refinishing due to weathering and decay are eliminated, and cleaning is easy. King StarBoard® has a handsome matte finish on both sides to hide scuffs and scratches that would show on glossy textured sheets or acrylics.
Click to expand...
 
Nice fish!! I'm officaly jealous that's one near the top of my fish to catch list. Looks like equaly nice weather were just putting away the snow sholels. I'm very impressed with the site and all the work everyone puts in to there boats lots of ideas and tips = lots of fishing time.
I head out tomorrow :sand: to pick up my V-21:sun:
WOOOOOOO!!!!!!!!!!!
 
Hey Redneck......I didn't know they had rednecks up in canada? :you:
That fishing trip in the pic was out of Cape Hatteras about 4 years ago on Memorial day weekend. We try to make it an annual trip down there at that time of year. Always fun and always fish to catch!

Best of luck on your V21. We are gonna needs to see pictures of it once you have some (if you haven't already posted some).
 
You must log in or register to reply here.
Back
Top