transom rebuild complete

Wolf

Wolf

Junior Member
It was a ton of work, but it turned out pretty nice.
 

Attachments

  • It Starts.jpg
    It Starts.jpg
    56 KB · Views: 201
  • Chainsaw.jpg
    Chainsaw.jpg
    69.5 KB · Views: 203
  • Glasswork.jpg
    Glasswork.jpg
    67.8 KB · Views: 198
  • Done.jpg
    Done.jpg
    45.3 KB · Views: 195
  • Done 2.jpg
    Done 2.jpg
    52 KB · Views: 185
That brings back fond memories. Looks real nice and I'm sure its plenty solid too? Which product did you use to fill it?
 
Thanks everyone, I used Arjay, worked very well. Easy to work with, poured very easy, filled every nook and crannie. It is a very solid...
 
That looks great. :clap:

I never heard of Arjay, so i googled it. Did you use the Pourable ceramic compound?

You went with a 25" transom, so is another motor in the works?
 
Yea, he is a good little helper.. :clap:

I used the ceramic pourable, I was very impressed, easy to work with and very strong. I looked at Sea Cast that happens to be made near by, its almost double the cost, This seemed like a very good alternative. Very happy with the results.
 
Wolf said:
Yea, he is a good little helper.. :clap:

I used the ceramic pourable, I was very impressed, easy to work with and very strong. I looked at Sea Cast that happens to be made near by, its almost double the cost, This seemed like a very good alternative. Very happy with the results.
Click to expand...

Keep us posted, Wolf!!...that looks great...glad to hear the Arjay worked out so well...thanks for the pics...what's the next step??...:clap:
 
took the v20 out, finally!!

Dad and I took the boat this week end for a shake down cruise. Man, is that etec nice. Boat performed very well, almost 5mpg at 30mph and thats running double oil since it has no hours on it. so far top speed is 48mph. You can see from the picture the little bilge is very tight, with two batteries, two bilge pumps, oil tank, live well pump and thru hull tranducer. So far i'm very happy with the entire set up. I guess all the hard work has paid off.
 

Attachments

  • bilge.jpg
    bilge.jpg
    37.4 KB · Views: 88
  • hang'n motor.jpg
    hang'n motor.jpg
    47.7 KB · Views: 81
  • hung.jpg
    hung.jpg
    40.6 KB · Views: 86
That looks GREAT Wolf!! Very nice job! It looks brand new! I did my full transom from the inside a few years ago. It was a pain but turned out great and has held up very well.
 
underwater lights

I used Lumitec lights, they light up White, Blue or White and Blue or fade from White to Blue. Nothing like a little Bling..
 
You must log in or register to reply here.
Back
Top