Wednesday night progress.......

[fishingwithblue]

Bypassed the fuel pick up and ran line straight into fill hole(great advice)and vwa-la....gas!

filled up my truck and topped off wifes car and tanked the rest. Let the last 5-7 gallons go to a stump.
While that was pumping, started to cut fiberglass and remove wet wood. Also tied two spoon flies(pics not good) for spring redfish.

Gonna let the wood dry out and grind tomorrow night. Then start replacing and glassing.......

 

[tsubaki]

Hate to kick you while the boat is down.

53" in front of Jekyll this weekend in the surf.
(came off another website)

 

[fishingwithblue]

Hate to kick you while the boat is down.

53" in front of Jekyll this weekend in the surf.
(came off another website)

Yeah.....I saw that this morning.....must work faster!

 

[fishingwithblue]

Thursday list

Got all my fiberglassing stuff together. Guess i'll pump the tank full of water and drain then start ripping foam. What is the best to use with the grinder to remove the wood and old resin from the hatch? Pics tonight.

 

[Slightly_Twisted]

When I was doing mine a wire wheel w/ on a 5in grinder worked really well to clean up any wood left.

 

[Mulv80]

If you are going to fill the tank with water, leave the water in there till your ready to remove it. The water will purge the gas vapors from the tank. The vapors are more dangerous than the gas itself.

 

[fishingwithblue]

If you are going to fill the tank with water, leave the water in there till your ready to remove it. The water will purge the gas vapors from the tank. The vapors are more dangerous than the gas itself.

Thanks!

 

[msbhammer]

Great Pics. Keep us posted.