What length control cables

Striper80

Striper80

Senior Member
What length and type of control cables

My uncle has an 89 V20 Cuddy cabin with a transom mounted 225 Yamaha. He needs to replace his control cables. I forgot what end has the length marked on them and was trying to save him the trouble of tearing the boat apart to look if they're on the control end. I figured you guys would have the answer or the necessary length. Also are there different style cables for different engine manufacturers? Thanks
 
Last edited:
Cable length

This is the general industry standard:

Measure length along cable route from control lever to center line of outboard, add 4 ft for motorwell loop, round up to nearest whole foot for total length to order.
 
Control Cables

Hey - I did forget to mention that different engine manufacturers will have different ball links attached to the cable ends, so make sure you get the proper length and that it is listed for use with your year and make of outboard.

Most distributors (iboats, Jamestown, etc.) have decent knowledgeable customer service folks that will help you to equip with the right gear.
 
You must log in or register to reply here.
Back
Top