Latest activity

  • spareparts
    spareparts replied to the thread Bought another boat.
    Btw, that leaves me at the 17 sea hunt, 21 sea ray,17 formula,17 diamond, sea doo ski,two isotope sailing cats,and 5 kayaks,plus the...
  • spareparts
    spareparts posted the thread Bought another boat in General.
    Gave a verbal.commitment to buy this boat,owned by a buddy of mine. 1971 17 ft Formula. Going to throw my 2.4 200 on it.
    • 1000003054.jpg
  • spareparts
    spareparts replied to the thread Mercruiser 220 mpi repower.
    Get all that squared away,throw amercury Mirage prop on it,grab a 17 or 19 pitch and see what it does,report back
  • spareparts
    spareparts replied to the thread Mercruiser 220 mpi repower.
    Make sure you have the correct t outdrive ratio. Should be 1.84( or close to that number). You can crutch the issue with lower pitch...
  • phatdaddy
    phatdaddy replied to the thread Console rebuild Lowrance 12”.
    just asking because can’t see in pic, is that your side mount control in pic on side, if so, does the mod give you enough room?
  • S
    steplift20 replied to the thread Don’t be afraid of it..
    I understand why you’re cautious of doing fiberglass. I am too but once you do it. It’s very easy. Messy but easy Clean the part your...
  • S
    That’s a beautiful boat you have. Worth every cent fixing her up. Do you think the new $100;000 dollar boats will look that good in 35...
  • S
    I would love to see the finished product I bet it’s going to look great too
  • S
    steplift20 reacted to phatdaddy's post in the thread lighting woes! with Like Like.
    I had to rewire mine also. Just ripped it all out and started all over. still ended up with a birds nest, but at least its MY birds...
  • L
    Leffe reacted to phatdaddy's post in the thread Console rebuild Lowrance 12” with Like Like.
    Looks great, Gonna be a nice upgrade.
  • L
    Leffe replied to the thread Console rebuild Lowrance 12”.
    Alot of fairing and sanding done. Plan was to gel coat it last weekend but found a 1inch/2,5cm gap on the lower part so had to fix that...
    • IMG_9212.jpeg
    • IMG_9209.jpeg
    • IMG_9208.jpeg
  • scook
    scook replied to the thread Once Upon A Coverup.
    I don’t think your question is incredulous at all, I’d say extremely likely. They’re like the Chinese CCP, there’s no reason to believe...
  • K
    Just repowered my 1990 v20 with Mercruiser I/O 220hp MPI. Only getting 22.5 knots at 3600 rpms with a 15x17 4 bladed aluminum prop. Any...
  • S
    steplift20 replied to the thread lighting woes!.
    Been there done that. We all have been I bet. The best thing to do is take it all out. And start from scratch. Use tinned wire. Get a...
  • S
    steplift20 replied to the thread I need advice..
    Yes. I think I’m going to remove the horn,plug up the holes and get a hand held air horn. I don’t like drilling into the hull. Top...
Back
Top