Latest activity

Sounds like he may also have the engine set too high on the transom. Easy to check, just hold a yardstick flat on the bottom of the...

Morning to all of you. Good seeing some old names coming back to the site.

My 2 cents are I like the cost savings for LED bulbs. If you buy the good ones and not the ones from Dollar General the last a long...

All of us miss your dad. He was a guiding light to all of us. As for you little lady, please visit here more. You are also missed...

I hate new stuff. Ill keep putting money in my old vehicles. But I like most led lights. The ones that look like old school bulbs...

What about a multi tool. . Wouldn’t that work?

Good to hear from you again. It’s been a long time. Welcome back

The wrist breaking bit happens when the bit goes through that tough as chit carpet!

I know it’s not a wellcraft topic but I have to get these two rants off my chest. First. I want my regular light bulbs back. These leds...

anytime you guys are using a hole saw in fiberglass, drill the pilot hole separately, then spin the hole saw backwards, it takes a bit...

Looks reely nice. I don’t need that. I drift a lot but I don’t have the guts to cut a hole in my deck.

Start the pilot hole with a sharp 3/8" bit. I used a fine tooth wood blade in the jigsaw. I went through 2 of them. Some of the carpet...

Nice work!

.

A problem I’ve had, drilling holes through the foredeck for bolts is getting through into the carpet glued to the underside. It grabs...