shaneburris74
Member
My boat has not seats. Gotta get some. What size pedestal was stock from the factory?
Thanks guys.
Thanks guys.
V-20 Seat pedestal size
- Thread starter shaneburris74
- Start date
shaneburris74
Member
Foam filled hull??
My hull has foam filling undernearth deck around the fuel tanks and out to the outboards. Is that something that someone has done or did they come from the factory like that????
My hull has foam filling undernearth deck around the fuel tanks and out to the outboards. Is that something that someone has done or did they come from the factory like that????
tsubaki
God
Interesting possibility to mount seat swivel on.
Double Step
TODD'S Boat & Dock Steps are offered in three different sizes. These lightweight, movable steps are made from U.V. resistant polyethylene for years of dependable service. The unique 1 1/2" wide bottom flange provides plenty of surface for mounting to your dock. Clean Up is made easy at the end of the day with just soap and water. Hand rails for the two and three step models are sold separately. Each model step is nestable upon itself for easy storage and shipping.
Dimensions
D=26 3/4" W=23 1/2" H=17" Part #: TBS202
http://www.boatdepot.com/productdetails.aspx?part=TBS202#
It would free up any soft floor problems and provide storage on interior and a seat or foot rest depending how it was positioned.
Double Step
TODD'S Boat & Dock Steps are offered in three different sizes. These lightweight, movable steps are made from U.V. resistant polyethylene for years of dependable service. The unique 1 1/2" wide bottom flange provides plenty of surface for mounting to your dock. Clean Up is made easy at the end of the day with just soap and water. Hand rails for the two and three step models are sold separately. Each model step is nestable upon itself for easy storage and shipping.
Dimensions
D=26 3/4" W=23 1/2" H=17" Part #: TBS202
http://www.boatdepot.com/productdetails.aspx?part=TBS202#
It would free up any soft floor problems and provide storage on interior and a seat or foot rest depending how it was positioned.
randlemanboater
God
Double Step
TODD'S Boat & Dock Steps are offered in three different sizes. These lightweight, movable steps are made from U.V. resistant polyethylene for years of dependable service. The unique 1 1/2" wide bottom flange provides plenty of surface for mounting to your dock. Clean Up is made easy at the end of the day with just soap and water. Hand rails for the two and three step models are sold separately. Each model step is nestable upon itself for easy storage and shipping.
Dimensions
D=26 3/4" W=23 1/2" H=17" Part #: TBS202
http://www.boatdepot.com/productdetails.aspx?part=TBS202#
It would free up any soft floor problems and provide storage on interior and a seat or foot rest depending how it was positioned.
Does that answer your questions?
shaneburris74
Member
seats and foam
I like the step thing...think it would be a possibility to mount a seat on. Although if I don't want to go with that what size pedestal will I need for factory height seats.
Also, the foam thing scares me if they can absorb water. Thats not good at all. Did they all absorb water right from the start or did something have to occur to cause it..ie. gas soaked, scarred badly etc. Its scary cause this hull I have was sitting uncoverd for a very long time.
I like the step thing...think it would be a possibility to mount a seat on. Although if I don't want to go with that what size pedestal will I need for factory height seats.
Also, the foam thing scares me if they can absorb water. Thats not good at all. Did they all absorb water right from the start or did something have to occur to cause it..ie. gas soaked, scarred badly etc. Its scary cause this hull I have was sitting uncoverd for a very long time.