V20 vs. V21 for enclosure purposes?

P

Parrot6909

Junior Member
I found an enclosure for a V20 that would be going onto a V21. Is there any hull design difference from Windshield back for the enclosures? The V21 is a 1994, the donor hull is a 1980ish. I know the transom is different but I want to be sure the enclosure will be ok for the V21. Thanks!
 
Go for it! The enclosure I have on my V21 came off of Franco's '83 V20. Yes the windshield is a bit different - V21 rounded has rounded side windows but all I did there was add snaps to the side curtains to match the rounded part. The back curtain is 1 or 2 inches too long - better too long than too short! Other than that, the width and depth is PERFECTO! I bought a cheap snap kit at Bass Pro for I think around $20. Easy job.

0407071201b.jpg

0407071201a.jpg

S2010083.jpg

0407071201c.jpg

0406071146.jpg

25lb_Red_Drum_Cory_Shane.jpg

0126081347a.jpg


These little heaters work great inside the enclosure.

0126081348.jpg


Couldn't help myself....had to throw in this pic :sun:
0126081657.jpg
 
p.s. forgot to mention that I need to have some straps sewn into the bottom of the side curtains in order to lash them down to the gunnel. I have a problem keeping the rear snap on, as you can see in the pic. I have a problem keeping them all on with just the side curtains on (no back curtain).

p.s.s. Don't laugh at my ugly blue seats. They have been replaced. :cen:
 
Parrot6909 said:
I found an enclosure for a V20 that would be going onto a V21. Is there any hull design difference from Windshield back for the enclosures? The V21 is a 1994, the donor hull is a 1980ish. I know the transom is different but I want to be sure the enclosure will be ok for the V21. Thanks!
Click to expand...

An original 1996 full enclosure for your viewing pleasure....

100_1749.jpg


100_1752.jpg


100_1747.jpg


100_1751.jpg


100_1753.jpg



Going back on reel soon!!
 
You must log in or register to reply here.
Back
Top