Looking for piece parts for a 89 V20

K

kamikaze

Junior Member
Not that I think I'll have much luck but you never know!

Looking for the two rear hatch lids and two rod boxes for a 89 V20. I can make the hatch lids if necessary but searching for the Rod boxes is difficult at best. Need to support a cutout of 59 1/2" X 15". If you have nay you want to part with just PM me.

Thanks
Kamikaze
 
Never found any used ones and ended up forming my own mold and making new ones. They came out pretty good and the mold is simple to configure. Give it a shot.
 
kamikaze said:
Not that I think I'll have much luck but you never know!

Looking for the two rear hatch lids and two rod boxes for a 89 V20. I can make the hatch lids if necessary but searching for the Rod boxes is difficult at best. Need to support a cutout of 59 1/2" X 15". If you have nay you want to part with just PM me.

Thanks
Kamikaze
Click to expand...

Search my post from previous years, I did purchase new rod boxes, course I can't remember the source. Let me know I can do some digging for you.
 
they do.. I bought a pair a few years ago, however I bought the off
white which is way too yellow... definitely go with the bright white!

some rainy day they will become a painting project!
 
Great link, thanks.
I took my old ones, did some glass work to them and shot them with a bedliner then mounted the rod holders. Going on year 3 and going strong.
 
You must log in or register to reply here.
Back
Top