1985 repairs

whatknot

whatknot

Junior Member
There is something to be said for buying a new boat. I'm not gonna say it though.
I'm missing out on some fine georgia fishing while I finish this mother. This should keep ya busy for at least a minute hammer...

IMG_9121.jpg


Bad wood ground out.
IMG_9653.jpg


Rock solid new
IMG_9717-1.jpg


New Tank - Sunshine Welding - it's good.
IMG_9652.jpg


Tank installed- I know the wiring color codes are not correct, but I'm rewiring the entire boat how I want it.
IMG_9705.jpg

IMG_9709.jpg


pulling new
_MG_9700.jpg


I liked the Blue Sea System Battery switch and 120 amp automatic charging relay. Here's the link. http://bluesea.com/products/7650 This installation still in progress. Link to the fuse panel I'm installing with busbars as well.

http://bluesea.com/category/5/20/productline/119
http://bluesea.com/category/9/35/productline/187

IMG_9711.jpg


Dang, someone take me fishing.
 
Oh man, great early morning fix on pictures. Almost as good as getting fresh jelly donuts. Thanks man. 8)
How much for the tank  ??? was it hard getting the tank out with the foam ??
Great work  ;)
 
dam you are doing one hell of a job :o :o

I love the new tank, what did it cost to get that thing fabricated?

looks great ;D
 
Thanks guys,

The tank is from Sunshine Welding - 760 Mullet drive, port canaveral Florida.
$480 with the sending unit installed. $130 to ship.
60 Gallon and .125 thick
They were fast too!!!

Jim at SunshineW e-mail batech_jim@bellsouth.net
 
WOW, thats alot of $$$$$$, I'll just go over to where Parishht keeps his V and grab his tank. He lives near by.  ;D ;D ;D
CY, think he does have a bracket, that extra/other floor hatch looks look it came from an I/O.
 
Came stock with the bracket. Had 200 zuki but my 150 2 stroke yami is on it now.
IMG_9135.jpg


Love to have a gallery....
 
HAMMER, be carefull, I left some guard dogfish in the hold,
I hope they live till next year,
I gave them 10 pounds of food. ;D ;D
 
This boat looks like it came with the Stainless Marine bracket from the factory. I see no signs of a patch or repair to add this bracket. Does anyone know if Wellcraft sold this setup or did all closed transoms come with a C drive?
 
Great job!! Nice Tank!!

Brackets were not wide spread back then, it has to be a seadrive conversion.
 
Definately a sea-drive conversion, you can see the round cut-out that was filled in the conversion if you look closely at the picture. Plus the factory bracket wasn't an option until 87 on the V-20.
 
You must log in or register to reply here.
Back
Top