1989 V20 Center Console Needs Motor - $3000

C

CatchingChrome

New member
1989 V20 Center Console Needs Motor - $3000 - pics added

Well last weekend my motor blew on my V20 and I have decided to sell her after 20 years of ownership. I am the original owner of the boat. Here are the detals:

1989 Wellcraft V20 Steplift (20 Fisherman) (White with blue accents)

1988 Yamaha 200 HP 2 stroke ( blown powerhead)

2001 Sea Lion Galvanized Trailer ( will accomadate up to a 23foot boat) We replaced the original trailer in 2002 due to the old one rusted out.

Overall the boat is in good condition, some gelcoat cracks typical with the age, It includes the bimini top. etc. With a little spit and polish the gelocat would look almost new again. My plain was to completely refinish it in the spring and maybe put a hard top on it.

Boat is located in Pittsburgh, PA however I can arrange delivery within 200 miles of Pittsburgh or Philadelphia, PA.

Looking for $3000 OBO.

Feel free to email me at catchingchrome@gmail.com for further information
catchingchrome_2009_201192.jpg


catchingchrome_2009_201191.jpg

catchingchrome_2009_201190.jpg


catchingchrome_2009_201189.jpg
 
Last edited:
CatchingChrome said:
Well last weekend my motor blew on my V20 and I have decided to sell her after 20 years of ownership. I am the original owner of the boat. Here are the detals:

1989 Wellcraft V20 Steplift (20 Fisherman) (White with blue accents)

1988 Yamaha 200 HP 2 stroke ( blown powerhead)

2001 Sea Lion Galvanized Trailer ( will accomadate up to a 23foot boat) We replaced the original trailer in 2002 due to the old one rusted out.

Overall the boat is in good condition, some gelcoat cracks typical with the age, It includes the bimini top. etc. With a little spit and polish the gelocat would look almost new again. My plain was to completely refinish it in the spring and maybe put a hard top on it.

Boat is located in Pittsburgh, PA however I can arrange delivery within 200 miles of Pittsburgh or Philadelphia, PA.

I'll post some pictures this weekend.

Looking for $3000 OBO.

Feel free to email me at catchingchrome@gmail.com for further information
Click to expand...


The pictures will surely help you move it...
 
20" motor, although I was going to repower with a 25" motor I found for sale and use a jack plate. The stringers are in good shape. One has a small gelcoat crack on it, I can possible send some pictures.
 
The boat actually needs a 25" motor I was wrong. I had a dealer tell me that I needed a 20" but I measured it and have the original dealer brochure and it is a 25" The boat is sold pending payment/pickup....​
 
You must log in or register to reply here.
Back
Top