1995 21ft. step vee for sale

few more pics of top

IMAG0007.jpg

IMAG0006.jpg

IMAG0005.jpg

Well some day i will actually list the boat for sale on ebay or something, in the mean time here is a few pics of the tops, sorry for the poor quality of the pics only had my phone with me at the time.
George
 
dmoore said:
Nice 21....could you tell me who makes the cockpit cover? Good luck on the sale!
Click to expand...


NICE lookin 21, GeoJ...looks about as clean as dmoore's...good luck w/the sale...that top oughtta help it move...then you can just send that cockpit cover right on over to the VA coast to Dave!!...:clap:
 
Thanks for the comment!

Selling soon as i figure out the ebay stuff, think im going to sell my 1963 mark twain (all restored) except newer motor and sell my 21 foot Norvuania Rib, inboard V8 with jet drive.....then buy myself another toy.
George
 
Hi GeoJ,

Any performance number on that set up? WOT, approx fuel burn, WOT rpm, etc.

That is a sweet looking rig and I just found a local v21 and fell in love but yours is much cleaner.

I have not owned a Wellcraft but they look like they would work out very well for our coastal Maine waters!
 
Weelcraft specs

Well it runs 42mph wot, the rpm and quite remember the exact number but it was below book max rpm, as for fuel i never really measured but i will tell you it is quite economical as compared to some fo the other boats i have, maybe some of the fellows on this site can comment on the fuel consumption, has plenty of power will plane quick with 7 or 8 people on it, and handles the water quite well, if you would like more pictures i have quite a few just email me at gjacin@pmpstamping.com
George
 
I have the same boat and basically the same motor. Avg. burn for me is 2.5 mpg and my WOT is the same, 42, running a 14 1/4 by 17 p. prop, if my memory is correct.
 
Wellcraft maybe i will keep it

I still never put the wellcraft up for sale anywhere else, now i am in the process of selling a couple other boats i have, and contemplating on keeping this one and towing it behind my motorhome, does anyone know if you can mount a bar on the back for pulling skiers and tubes that would go over the motor? Just was not my ideal tow around boat, but who knows.
George
 
geoJ said:
I still never put the wellcraft up for sale anywhere else, now i am in the process of selling a couple other boats i have, and contemplating on keeping this one and towing it behind my motorhome, does anyone know if you can mount a bar on the back for pulling skiers and tubes that would go over the motor? Just was not my ideal tow around boat, but who knows.
George
Click to expand...

Look at Reelapeelin's signature. The boat has a wakeboard tower. I'm sure he can tell you better than anyone how to set it up.
 
I think it looks like a very nice boat. Question the wood plank across the transom ?

Year engine and compression ?
Is the floor and transom solid ?
What does the boat need ?

Thanks
 
wakeboard tower ?

Well i looked around on the sight and could not seem to find the pictures of the wakeboard tower, can any one send me a picture to gjacin@pmpstamping.com If i keep think i definatley need one of them.

For bgreene---sent you some more pics, the plywood is the mount for the trolling motor has a wired control for it up front, motor is original motor, hull and transom are solid as can be, not sure on compression i could get but i a m sure it will be good.
 
Here's the ski-post they're talking about...I had it on my '74 and the 21...it worked well for years for wake-boards and tubes...I liked it because it was removable when it was fishin' time...


http://www.overtons.com/modperl/pro..._Deck_Master_Pylon&str=ski+pylon&merchID=4005

You can barely see it in the photo below...it mounted higher in the 21 because I was able to base it on the front wall of the splashwell...mount it the higher the better...
 
Last edited:
Thanks for the picture and the link, do them things just bolt to the fiberglass, no problme cracking from all the pulling?
Thanks again!
George
 
Also i noticed on the web site says not reccomended for inflatables? Do you use yours for that? Is it becasue more pressure on it?
Thanks
 
geoJ said:
Also i noticed on the web site says not reccomended for inflatables? Do you use yours for that? Is it becasue more pressure on it?
Thanks
Click to expand...


Geo, I used mine for towing an inflatable w/no problems...and we put it thru some pretty good trials!!...I will qualify that by saying we only had a round disc shaped inflatable that really didn't produce much drag...

As far as mounting...two of the rear mounts go THRU the transom and are pretty heavy-duty...the pylon itself thru-bolts to the floor or in the case of the 21, thru-bolted to the top of the front splashwell wall...it had a 5-bolt pattern which only allowed for 4 bolts to attach, but we never had any problems...

The biggest strain we put on it was trying to get some pretty big guys outta the water who didn't know how to wakeboard...some made it, some didn't...either way, there was a LOT of pull on that thing and it never faltered...

I found some pics...this in the 21...

95V-21050.jpg


95V-21048.jpg


Hope these help...we really worked this thing...my next boat will have another one just like it...
 
Last edited:
You must log in or register to reply here.
Back
Top