Another Boat

Zebra

Junior Member
I go to auctions for my business and sometimes see things that interest me. I try not to get involved into things that I dont deal with in my business but this little boat came up and I was high bidder on it. Its is a crap shoot you dont get to hear it run and they tell you very little about it. Well i ck. it over best i could, transom and the floor seemed fine. The sterring cable needed to be replaced and the engine condition at least seemed clean. But i am no Skools and i know i was takin a chance. Put some cash into it and its great now... gonna play with it and see if it sells... The 70hp rude pushes it around 34mph with 2 pax. Wondering just how shallow it will go, we got area's where red fish are and you need to get into 14-18 in. of water if this boat works out may hold on to it or ask for more cash for it. Fishin buddy split the cost with me so it just hurts half as much as far has cash invested. Gonna use it until it sells than look for another. Zebra

RiverRunt10001.jpg


RiverRunt20001.jpg


RiverRunt30001.jpg
 
I go to auctions for my business and sometimes see things that interest me. I try not to get involved into things that I dont deal with in my business but this little boat came up and I was high bidder on it. Its is a crap shoot you dont get to hear it run and they tell you very little about it. Well i ck. it over best i could, transom and the floor seemed fine. The sterring cable needed to be replaced and the engine condition at least seemed clean. But i am no Skools and i know i was takin a chance. Put some cash into it and its great now... gonna play with it and see if it sells... The 70hp rude pushes it around 34mph with 2 pax. Wondering just how shallow it will go, we got area's where red fish are and you need to get into 14-18 in. of water if this boat works out may hold on to it or ask for more cash for it. Fishin buddy split the cost with me so it just hurts half as much as far has cash invested. Gonna use it until it sells than look for another. Zebra

RiverRunt10001.jpg


RiverRunt20001.jpg


RiverRunt30001.jpg
 
Looks ready to go.
Livewell under the seat? And rear bait boxes. Looks like it will scoot. Any asperations about a jack plate for shallow running?
 
Looks ready to go.
Livewell under the seat? And rear bait boxes. Looks like it will scoot. Any asperations about a jack plate for shallow running?
 
I see the boxes were added and need holes for the bait!!

Thats not a bad Idea. But I bet they drain when under way??
 
I see the boxes were added and need holes for the bait!!

Thats not a bad Idea. But I bet they drain when under way??
 
(Normally) There's holes in the bottom also. If done correctly they actually keep circulating water while running and keep some water in it when stopped.
If done incorrectly the bait box will overflow when running and actually flow water out of the top lid (and bait).
 
(Normally) There's holes in the bottom also. If done correctly they actually keep circulating water while running and keep some water in it when stopped.
If done incorrectly the bait box will overflow when running and actually flow water out of the top lid (and bait).
 
what brand is it? Looks simular to a sea squirt a buddy if mine used to have. Depending on what you paid, i think you did good. a lot of people who have 25' boats can't sell them and people who are looking for 15'-17' boats can't find them..
 
what brand is it? Looks simular to a sea squirt a buddy if mine used to have. Depending on what you paid, i think you did good. a lot of people who have 25' boats can't sell them and people who are looking for 15'-17' boats can't find them..
 
cool boat! I had the same motor [75 hp] and you couldn't beat its simplicity and reliability. It looks to have the "early" vro injection system.....the early ones are destine for failure.....loose the vro and that motor won't give any problems.
 
cool boat! I had the same motor [75 hp] and you couldn't beat its simplicity and reliability. It looks to have the "early" vro injection system.....the early ones are destine for failure.....loose the vro and that motor won't give any problems.
 
Back
Top