HULL REPAIR

The dish's are piled up in the sink, the dogs havent been fed, no loven to the wife all this weekend, BUT at least I can say I got alot done on the boat. Installed new wiring, new bilge pump, switch, along with auto, manual, off switch on the dash today. So for have the boat for 30 days now, I completely rewired most of the boat with new wire, toggle switchs, fuse panel,ect.
Still want to install new batteries, battery cables, dual switch, temp. guage, psi guage, replace the scuppers, declog the baitwell. But I'm getting there : )
Hopefully in March I can have the fiberglass to his magic.
I live just down the street from the Lewes boat yard and know the owners son, so he can lift the boat off for me and place on jacks. While the glass work is being done I can install much needed new rollers on the trailer. Hope this warm weather stays with us.
Later.
Hammer. : )
 
Hammer, I'm not sure of your layout, mine is a 83 OB, but I installed a hatch just outside of the cabin between the door and the deck well. This allows me to get to the bow side of fuel tank compartment and i can see the upstream side of the drain tube. I've taken a pressure washer and blown out a lotof trash that gets in to the bilge from he step own in he cabin. This also give a hugh storage hole for nets , buckets fenders, etc.
 
You must log in or register to reply here.
Back
Top