MJ, CB, Project, What is it?

macojoe

macojoe

Administrator
Ok we have started!!

Here's a hint, What is it?? Be back with more later!!

Picture202.jpg


Picture201.jpg
 
It's a clone of CB cleverly constructed out of 11 pieces of starboard and one sheet of plexiglass that does MJ's bidding ;)! MJ you are truly a starboard artist.

Or it is either an electronics box or a baitwell with a clear top.
 
Its a cabinet of storage drawers? The strips that CB is holding are drawer slides or stops? I dont know what to think of the plexiglass unless you are gonna make a clear door for it.
 
Thats a good one Franco!!

I just threw that pic on to throw people off!!

The main part is done, but we need one more day for the install, maybe next week? We had a long day today but all went well!!

Ok here we go!!

Franco you are the winner!!

123c7b35.jpg


5c359411.jpg


2d177295.jpg


ced68b0f.jpg


848d1336.jpg


f70ff46d.jpg


d9d2a548.jpg


78af30b8.jpg


aa394bd8.jpg


20c80fd5.jpg


f97c3fe8.jpg


1db16853.jpg


36b627fc.jpg


b9c2cab9.jpg


Questions ?????????????????
 
Where ya gonna mount it MJ ?? It looks great. Your gonna win the prize for " Most Creative " at the V20 Christmas Party!!!!
 
Wow..talk about your built-in tackle locker....NICE...did you put in drawer stops?... ;)...

Great job guys...I'm buyin' stock in Starboard... ;D...
 
The two draws have stops so they won't drop out on you foot!!

The bottom draw is 14 X 9 x 4 holds a ton of sinkers!! a slot for 12, 10, 8, 6, 4, 3oz
 
the two top plano boxes are #3700 14 X 9 X 1 1/2 The 3rd Plano is # 3730 and is the same size but like 2 1/2 high.

The middle draw is 3 X 14 X 9, Has plex glass on one side that has 15 holes drilled to hold my 35 mm film bottles with all different hooks, swivels ect.

Pleanty of room also in that draw for all my leader material.

The bottom draw 14 X 9 X 4 with pleanty of room for sinkers.

Over all it is 16 1/4 High 15 wide and 9 1/2 deep
 
AWESOME!!!! I was thinkin about that some time back. Building one is definitely better IMO cause you can size it up and make it just how YOU like it. ;D
 
Yes!! I was able to make the sinker box just the way I wanted it!! And then nin the 2nd draw I was also able to make the storage for the film cases.
I even changed the plan when I got to the store to by the plano boxes, They were all going to be #3700 but when I got there and saw the #3730 and how deep it was I thought it would be great for the jigs, and I was right.

You don't get that when you by pre-made!! I am very happy the way this worked out!! And now we no what mistakes we made so when we make CB we won't make them again!
 
Thanks!! But there are a few things that if doing again we would change.

But it is great just the way it is and I love it!!!!!

But we got it down now!! We will do better with CB's when we make it!!

A guy on another site has offered me $40 to $50 per hour to do Starboard work on some 40 boats he takes care of. Door's, rod holders, ect.....

I have declined! I need to fish, no more playing!!
 
You must log in or register to reply here.
Back
Top