my 7 yrs warranty

lumberslinger178

lumberslinger178

God
Ok My warranty just ran out this spring and almost 7 yrs to the month My computer took a sh!t tues to the tune of 1500.00 bucks. It could be worst i guess at least ive got my health ....lol
 
Having your health is no laughing matter.
Sucks about the warranty and computer failure. This is the E-tec?
I have been waiting for the other shoe to drop on this Optipop. Mercury computer, compressors, coils, TPS and injectors. I don't think $1500 is too bad my boating brother. Hell I throw near half of that in the drink on a good weekend. LOL! :embarsed:
 
spareparts said:
I'm surprised its only $1500, most ecu's retail for at least $2000
Click to expand...

Which of course is total bu!!sh!t. They (the manufacturers) know they have us by the short hairs, so they jack the price up, then the jobbers do the same and finally the retailers gotta get their share also... My point is that you can buy ECU's for 8 cylinder cars for as low as $150 on eBay, and even then the seller is making a profit. I know it's all about supply and demand, but sometimes the exorbitant prices charged for marine parts just gets under my skin and I gotta vent. And remember that the auto ECU's do as much or more, are completely sealed in epoxy and are just as waterproof. Fact is I'd be VERY surprised if the marine ECU actually cost more than $75 to build in the factory, including parts and labor.

OK, that's the end of my rant ... like I said, sometimes it just gets under my skin...

Sorry for your loss Lumber, and Spare, you know that I'm not venting at you in any way shape or form... :beer:
 
Damn, tried raising hell with anybody?

Are you on ETEC Owners Group Forum? Someone there might have some words of advice.

I'd ask for you old ECU back, I'll bet some tech geek with a soldiering iron could fix it for cheap.
 
Last edited:
the problem with buying a used ecu from e-bay or anywere else is alot of times they cant be reprogramed to match the motor. we ran into that alot when i worked for BMW & MERCEDES. once the ecu was programed for a pacific vin# you could not take it out and put into another car and reprogram it to that vin# hence forceing the customer to go to the dealer. they are high for what they are. i would call customer service and ask for some GOODWILL ASSISTANCE!! was it dealer installed? if so they should be able to contact the service rep and get you some kind of help!!!
 
trust me be firm out of pure customer satisfaction I think they will do something for you!!!!! it my be they pay for the part and you pay labor or it could be a 50/50 split. anything they do for you you will be better off than having to take the full brunt of the cost!!!! let me know what happens!! good luck!!!!!!!!!
 
boating & fishing prices have no reason. considering what all the ecu does & what it took to engineer it & make it, that price seems more reasonable than guys spending $750 for a cooler. 300 hours does seem a little premature. i hope that is the problem, not the symptom of another issue. my merc went through 3 or 4 switchboxes before we figured it was a ground upstream causing the problem.

you could get the dealer to write it up as a Dewalt part and write it off
 
the daydreamer said:
the problem with buying a used ecu from e-bay or anywhere else is a lot of times they cant be reprogrammed to match the motor. we ran into that a lot when i worked for BMW & MERCEDES. once the ecu was programmed for a pacific vin# you could not take it out and put into another car and reprogram it to that vin# hence forcing the customer to go to the dealer. they are high for what they are. i would call customer service and ask for some GOODWILL ASSISTANCE!! was it dealer installed? if so they should be able to contact the service rep and get you some kind of help!!!
Click to expand...

Yep, was not ranting about things like that. A used ECU off of eBay is rarely a good investment, simply for the reason you pointed out. But the price I quoted was valid. My point was the outrageous prices charged for marine equipment in general. They (the makers of such) would have us believe that they have to charge more because of extra steps necessary for marine use, and, to a point, they are correct. But if a part costs $100 to make normally, and $150 to make for marine use, it should NOT give them the right or the ability to charge $2000 for it! But since they know that without that part your $15,000 engine will not run they feel free to do such things, and from where I sit, it's just plain wrong.

(And as far as EEPROM's go, anyone with the right equipment and knowledge should be able to reprogram one. But dealer only software is closely guarded, just so that they can charge whatever they want).
 
bradford said:
Damn, tried raising hell with anybody?

Are you on ETEC Owners Group Forum? Someone there might have some words of advice.

I'd ask for you old ECU back, I'll bet some tech geek with a soldiering iron could fix it for cheap.
Click to expand...

My best friend is a Yamaha dealer. He often has cases like this. With enough input from himself and the boat owner, 9 times out of 10 Yamaha steps up and takes care of the issue with at least a 50% discount on parts but sometimes when they see the hours etc, they will eat 100%.

Def worth trying !
 
draglink said:
My best friend is a Yamaha dealer. He often has cases like this. With enough input from himself and the boat owner, 9 times out of 10 Yamaha steps up and takes care of the issue with at least a 50% discount on parts but sometimes when they see the hours etc, they will eat 100%.

Def worth trying !
Click to expand...


I hope something works out like this for Lumber. If it were on a 3000 hour commercial crab boat I'd figure well you got the goody out of it, but 300 hours on an obviously meticuously maintained and lightly used boat is way too soon for something that important and costly to go bad.
 
I would think that they will give you a computer. I don't deal with etec's but I know Merc and Yamaha take care of their customers. I replaced a f350 powerhead that had a freeze crack in the head due to poor drainage. The motor was 3 years out of warranty. Yamaha sent a new short block and heads for free. My Merc puked an air compressor 4 months out of warranty. Merc sent me one for free. I'm sure they'll do the right thing. Gotta get her going for next weekend.
 
You must log in or register to reply here.
Back
Top