Need prop for 1977 Chrysler 135hp

[Silvermax]

Had the 1977 engine on my 1976 V-20 project boat repaired mechanically (was fresh water used) but prop was damaged beyond repair.
Was a 13/15 and I can't find a replacement. I included some pics where I painted and cleaned to look original. I can't wait to get her in the water now a year on project.

Replaced steering and control cables as the control box was very good condition. I need a prop, and depth finder. Money is still tight.

I picked up a 28 gallon flat black tank for $40 used, as the saddle tanks were bad.
Looking for any help, thanks

 

[Destroyer]

Here ya go. Might not be "optimum" but also might be just what the doctor ordered. Not knowing how many splines in your propshaft or how the prop is attached makes finding the exact one for you difficult. Based on what you said though either of these will hopefully fill the bill. Do a search on eBay, I found several more, with widely different prices. Good luck.

http://www.ebay.com/itm/New-PR-78-M...ash=item1c64ca8625:g:u5cAAOSwSzdXCH8I&vxp=mtr

http://www.ebay.com/itm/Propeller-f...ash=item1a1605b318:g:QFQAAOSw34FVChdX&vxp=mtr