soda or sand blaster

spanishmak said:
you guys wont believe this but easy off oven cleaner takes the bottom paint right off I will post some pics later:love:
Click to expand...

Now THAT is interesting.. Good to know.. thanks for the tip.!!!!

Spanish, if you hang around here long enough you'll find that almost everyone here treats everyone else like family.. and I guess that's the magic of this place.. we ARE a family of boaters with a love for a particular type of hull. All opinions are respected, all advise is freely given, ...it's just a great place to hang. :clap:

(Special thanks to RWilson2526 for inviting me here in the first place. I owe you a lot Rob!)
 
easy off

destroyer i completely agree with you this is one hell of a sight and im really starting to feel really comfortable in here i have learned alot from this forum and anything i can give back to it i will do it very gladly,Icouldnt wait to post these pics,realize that this is only the beginning of this project and i will be posting pics all the way through until I am finished.OK here are the pics(I AM NOWHERE NEAR FINISHED).Even where the bottom paint that is off i am still going to go over it again to get as much off as i possibly can(easy off).
 

Attachments

  • before.jpg
    before.jpg
    75 KB · Views: 36
  • after.jpg
    after.jpg
    68.4 KB · Views: 40
  • other side.jpg
    other side.jpg
    66.8 KB · Views: 36
  • transom.jpg
    transom.jpg
    66.9 KB · Views: 37
Last edited:
soda or sand blast

Welp finally got bottom paint of hull stripped(easy off and sanding)and done.Now gettin ready to work on fish boxes and coolers.I will never buy a boat with bottom paint again!!!!
 

Attachments

  • boat.jpg
    boat.jpg
    49.1 KB · Views: 29
  • boat1.jpg
    boat1.jpg
    61.1 KB · Views: 29
Last edited:
looks nice!

May I ask approximately how many hours this took you, and how many cans of oven-cleaner were required?

[EDIT] and did you neutralize the oven cleaner with anything (like baking soda for example), or just wash it off with water?
 
Last edited:
soda or sand

It took about 10 cans of easy off but it did not take off the last layer of bottom paint I had to sand that off,but the easy off did save me alot of sanding.Did nothing but wash it off,it does not harm gelcoat:beer:
 
heres when they soda blasted the bottom of my boat in 2007 and it cost me 500.00

DSC03409.jpg


DSC03410.jpg


DSC03417.jpg


DSC03418.jpg


DSC03380.jpg


Then came the barrier paint and the micron

DSC03488.jpg


DSC03495.jpg


DSC03461.jpg


new drain plug while I was at it.

DSC03527.jpg


new swim platform too.

DSC03548.jpg


DSC03509.jpg


new rub rail .with 5/8 rope

DSC03566.jpg


new boot stripe and graphics

DSC03637.jpg


DSC03682.jpg


DSC03683.jpg


oh the engine 07

DSC03684.jpg


DSC03685.jpg


new girl

DSC03891.jpg


thats all I have to say about that!!!!!
 
You must log in or register to reply here.
Back
Top