V21 wellcraft blown engine for again maybe

D

deshet

Junior Member
V21 wellcraft blown engine for Sell $2800

The V21 is in good shape.
There is one issue, the floor has a soft spot that starts a little after the gas tank cover and ends about 8-10" before the transome.

The stringers are good. The fiberglas is not a major repair. A fiberglass guy can fix it for next to nothing.

I currently have 4 boats and I am looking at 5th one. So I will let the boat go for what I have into it.

I have had 5 V's so I am pretty fimilar with what to look for on these boats. This boat with a good engine would bring $8-$10,000 depending on how you set it up.

You could always rebuild the current engine.



I paid $2300
Diesel fuel pickup up the boat $300
Time $200

Total asking price for members $2800 not too be for a 1996 V21 hull

Don't make any lower offers because the won't be considered. I could put an engine on the boat and almost double my money.

Thanks
 
Last edited:
your 2000 150 johnson should work great.

It has a 1996 Johnson 200 on it now. Nothing has been removed from the boat.

Thanks
 
I had some pictures up here the other day. The link to the pictures does not work anymore. The other guys up here saw the pictures. It is a good looking boat. You live in suffolk probably within 15 mins of me in Chesapeake it will probably be easier for you to come buy. My wife has the camera and will not be back in town until Wednesday

Thanks
 
you would look good riding in a V21 Dawg machine with a Honda on the back Oz
Put your super models in the back and you will be stylin!!
 
I don't know on that one bud, I would think not. Unless there is some crafty way of using a jackplate or something similar. But 5 inches is a good stretch engine mounting wise.
 
willy said:
I don't know on that one bud, I would think not. Unless there is some crafty way of using a jackplate or something similar. But 5 inches is a good stretch engine mounting wise.
Click to expand...

How 'bout a Jack Plate...lowered for running...raised for tilting?...
 
reelapeelin said:
How 'bout a Jack Plate...lowered for running...raised for tilting?...
Click to expand...

Thats what I was going to try until I found a 20" V-20. It will be a high dollar venture though cause you will have to have a hydraulic jack plate.

They make another bracket sort of thing that raises and lowers....I can't remember the name, but they were more than a jack plate.
 
I was just thinking a lot of you guys maybe more handy then I am, I need a covered screened deck built. I would be willing to trade my V21 for the work. If anyone is interested let me know.

Thanks,
 
Hey Lumber, a vacation in Va. Beach and a spare V or a V for Carly instead of the wood boat you were going to build.
 
You must log in or register to reply here.
Back
Top