Wiring

[C YENSEN]

Anyone have a simple wiring diagram for a mid 80s? Specifically wires on back of instrument panel.....

 

[spareparts]

from my best recollection for most domestic engine wiring
Red= 12 volt constant
Black= 12 volt ground
purple=key on 12 volts
yellow/red stripe= starter circuit
Tan= temp
Tan/blue stripe= alarm circuit
light blue=oil pressure
light brown=trim
gray=tach signal
green = hull ground
black/yellow stripe=stop circuit on outboards
purple/white stripe and sometime black/white stripe=choke or enricher
light blue/white stripe(sometimes just light blue) trim up
green/white stripe(sometimes just green) trim down
purple/white stripe=trailer trim
Yamaha/Suzuki/Honda all have their own colors
hull wise, normally i see pumps all dark brown with colored stripes for more than one pump(each pump gets its on color stripe)
lights are generally gray, with stripes for multiple lights

 

[phatdaddy]

Loading…

newboatbuilders.com

This one is pretty generic, First one i found using search
Some one has a black and white one that is more specific to the V20

It’s on here somewhere

Edit:
Found it
Look in the links section 5th topic down

 

[C YENSEN]

thanks gentlemen, finally got it figured out. wire from key to solenoid was bad. ran a new wire and got her going

 

[steplift20]

Spareparts you are amazing. I wish I knew 10 percent of what you know about engines .